Boston Gear
F7718-10-B5-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835122
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Torque Out @ 1750 rpm | 536 in lb |
| Shaft Assembly Code | H |
| Reduction Type | Single |
| Motor HP | 1 hp |
| Input (Shaft or Bore) Size | 5/8 in |
| Media Mapping Output | H |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Output Speed | 175 rpm |
| Fan Cooled | No |
| Frame | 56C |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Family Name | F |
| Box Width | 5 1/32 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Style | Right Angle |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output Shaft | Solid |
| Lubrication | None |
| Box Height | 5 3/4 in |
| Bore Code | B5 |
| Ratio | 10:1 |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Use With | 718 |
| Torque Out @ 1150 rpm | 480 in lb |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Motor Application | General Purpose |
| Frame Size | 56C |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Housing Material | Cast Iron |
| Media Mapping Style | F |
| Motor Frame Size | B556C |
| Worm Position | Universal |
| Output Configuration | Left & Right Output |
| Box Length | 5 1/2 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Center Distance Code | 718 |
| HP @ RPM | 1 hp @ 1800 rpm |
| Washdown Duty | No |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Base | No |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Standard | AGMA Service Class I |
| Output (Shaft or Bore) Size | 7/8 in |
| Series | 700 |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Input Motor HP | 1.50 |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Rated Efficiency | 92% |
| Output Bore Shaft Dia. | 0.875 in |
| Center Distance | 1.75 in |
| Keyway Size | 3/16 x 3/32 |
| Material | Cast Iron, Standard Paint |
| Input Configuration | C-Face Quilled |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Output Torque | 536 lb-in |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Weight | 19.1 LB |
| EAN or UPC | 781711519288 |
