Find a Service Center
Boston Gear
F718-10-B7-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870734
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque | 536 lb-in |
| Box Height | 5 3/4 in |
| Reduction Type | Single |
| Output Configuration | Left & Right Output |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Frame Size | 140TC, 180C |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Washdown Duty | No |
| Worm Position | Universal |
| Media Mapping Style | F |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Rated Efficiency | 92% |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Torque Out @ 1150 rpm | 480 in lb |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Torque Out @ 1750 rpm | 536 in lb |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output Speed | 175 rpm |
| Shaft Assembly Code | H |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Style | Right Angle |
| Series | 700 |
| Output Bore Shaft Dia. | 0.875 in |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| HP @ RPM | 1 hp @ 1800 rpm |
| Lubrication | None |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Shaft | Solid |
| Output (Shaft or Bore) Size | 7/8 in |
| Motor HP | 1 1/2 hp |
| Fan Cooled | No |
| Center Distance Code | 718 |
| Use With | 718 |
| Family Name | F |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Media Mapping Output | H |
| Bore Code | B7 |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Input Motor HP | 1.50 |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Keyway Size | 3/16 x 3/32 |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Box Width | 5 1/32 in |
| Motor Application | General Purpose |
| Ratio | 10:1 |
| Standard | AGMA Service Class I |
| Input Configuration | C-Face Quilled |
| Center Distance | 1.75 in |
| Motor Frame Size | B7140TC180C |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Housing Material | Cast Iron |
| Box Length | 5 1/2 in |
| Material | Cast Iron, Standard Paint |
| Base | No |
| Frame | 140TC, 180C |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Weight | 19.1 LB |
| EAN or UPC | 781711525807 |
