Find a Service Center
Boston Gear
F718-10-B7-J
700 Series 10:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101872189
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Frame | 140TC, 180C |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Fan Cooled | No |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Base | No |
| Series | 700 |
| Worm Position | Universal |
| Output Configuration | Right Output |
| Output Bore Shaft Dia. | 0.875 in |
| Motor HP | 1.5 hp |
| HP @ RPM | 1 hp @ 1800 rpm |
| Box Height | 5 3/4 in |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Center Distance | 1.75 in |
| Torque Out @ 1150 rpm | 480 in lb |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Family Name | F |
| Style | Right Angle |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Center Distance Code | 718 |
| Torque Out @ 1750 rpm | 536 in lb |
| Input (Shaft or Bore) Size | 7/8 in |
| Box Length | 5 1/2 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Material | Cast Iron, Standard Paint |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Washdown Duty | No |
| Output Speed | 175 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Frame Size | 140TC, 180C |
| Media Mapping Style | F |
| Output Shaft | Solid |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Housing Material | Cast Iron |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Lubrication | None |
| Output Shaft Projection | Solid Right Output |
| Shaft Assembly Code | J |
| Ratio | 10:1 |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Use With | 718 |
| Output (Shaft or Bore) Size | 7/8 in |
| Keyway Size | 3/16 x 3/32 |
| Motor Frame Size | B7140TC180C |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Standard | AGMA Service Class I |
| Media Mapping Output | J |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Rated Efficiency | 92% |
| Input Configuration | C-Face Quilled |
| Box Width | 5 1/32 in |
| Bore Code | B7 |
| Reduction Type | Single |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Output Torque | 536 lb-in |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Motor Application | General Purpose |
| Input Motor HP | 1.50 |
| Weight | 19.1 LB |
| EAN or UPC | 781711525821 |
