Boston Gear
F7718-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809112
- 0.5 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Series | 700 |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Family Name | F |
| Motor Frame Size | B556C |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Washdown Duty | No |
| Material | Cast Iron, Standard Paint |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Base Mounting Attachment | No Base |
| Lubrication | None |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| HP @ RPM | 0.3333333 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Box Width | 5 1/32 in |
| Output Torque | 609 lb-in |
| Rated Efficiency | 74% |
| Torque Out @ 1750 rpm | 609 in lb |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Torque Out @ 1150 rpm | 525 in lb |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Media Mapping Output | J |
| Frame Size | 56C |
| Shaft Assembly Code | J |
| Output Shaft | Solid |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Output Shaft Projection | Solid Right Output |
| Output RPM @ 1750 rpm Input | 44 rpm |
| Keyway Size | 3/16 x 3/32 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Media Mapping Style | F |
| Use With | 718 |
| Ratio | 40:1 |
| Max. Input HP @ 100 rpm | 0.052 hp |
| Input Configuration | C-Face Quilled |
| Center Distance Code | 718 |
| Output Configuration | Right Output |
| Input Motor HP | 0.50 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Box Length | 5 1/2 in |
| Motor Application | General Purpose |
| Input (Shaft or Bore) Size | 5/8 in |
| Style | Right Angle |
| Output Speed | 43.8 rpm |
| Standard | AGMA Service Class I |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Output Bore Shaft Dia. | 0.875 in |
| Fan Cooled | No |
| Bore Code | B5 |
| Base | No |
| Output Torque @ RPM | 609 in lb @ 1750 rpm, 525 in lb @ 1150 rpm |
| Box Height | 5 3/4 in |
| Reduction Type | Single |
| Center Distance | 1.75 in |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Motor HP | 0.3333 hp |
| Output (Shaft or Bore) Size | 7/8 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Frame | 56C |
| Input Power Rating | 0.57 hp, 0.425 kW |
| Input HP @ RPM | 0.57 hp @ 1750 rpm, 0.33 hp @ 1150 rpm |
| Housing Material | Cast Iron |
| Worm Position | Universal |
| Weight | 19.1 LB |
| EAN or UPC | 781711519448 |
