Find a Service Center
Boston Gear
F7718-60-B5-J
700 Series 60:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101856454
- 0.33 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Fan Cooled | No |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Motor HP | 0.3333 hp |
| Output Shaft Projection | Solid Right Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Washdown Duty | No |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Motor Application | General Purpose |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Housing Material | Cast Iron |
| Input (Shaft or Bore) Size | 5/8 in |
| Family Name | F |
| Media Mapping Style | F |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Input Configuration | C-Face Quilled |
| Use With | 718 |
| HP @ RPM | 0.25 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Shaft Assembly Code | J |
| Center Distance Code | 718 |
| Frame | 56C |
| Torque Out @ 1150 rpm | 440 in lb |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Output Bore Shaft Dia. | 0.875 in |
| Rated Efficiency | 70% |
| Output (Shaft or Bore) Size | 7/8 in |
| Base | No |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Media Mapping Output | J |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Input Motor HP | 0.33 |
| Standard | AGMA Service Class I |
| Box Length | 5 1/2 in |
| Input Power Rating | 0.35 hp, 0.261 kW |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Torque Out @ 1750 rpm | 527 in lb |
| Material | Cast Iron, Standard Paint |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Series | 700 |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Output Torque @ RPM | 527 in lb @ 1750 rpm, 440 in lb @ 1150 rpm |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Input HP @ RPM | 0.35 hp @ 1750 rpm, 0.21 hp @ 1150 rpm |
| Motor Frame Size | B556C |
| Bore Code | B5 |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Box Height | 5 3/4 in |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Lubrication | None |
| Box Width | 5 1/32 in |
| Output Configuration | Right Output |
| Center Distance | 1.75 in |
| Output Speed | 29.2 rpm |
| Worm Position | Universal |
| Ratio | 60:1 |
| Output Torque | 527 lb-in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Reduction Type | Single |
| Frame Size | 56C |
| Style | Right Angle |
| Weight | 19.1 LB |
| EAN or UPC | 781711519509 |
