Find a Service Center
Boston Gear
F7718-60-B5-J
700 Series 60:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101856454
- 0.33 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Input Motor HP | 0.33 |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Input Power Rating | 0.35 hp, 0.261 kW |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Style | Right Angle |
| Output Speed | 29.2 rpm |
| Output Bore Shaft Dia. | 0.875 in |
| Media Mapping Style | F |
| HP @ RPM | 0.25 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Frame | 56C |
| Motor Application | General Purpose |
| Motor HP | 0.3333 hp |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Media Mapping Output | J |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Torque Out @ 1750 rpm | 527 in lb |
| Output Shaft | Solid |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Worm Position | Universal |
| Bore Code | B5 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Ratio | 60:1 |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Torque Out @ 1150 rpm | 440 in lb |
| Output Shaft Projection | Solid Right Output |
| Center Distance Code | 718 |
| Box Length | 5 1/2 in |
| Standard | AGMA Service Class I |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Box Width | 5 1/32 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Base | No |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Output (Shaft or Bore) Size | 7/8 in |
| Series | 700 |
| Family Name | F |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Housing Material | Cast Iron |
| Input HP @ RPM | 0.35 hp @ 1750 rpm, 0.21 hp @ 1150 rpm |
| Base Mounting Attachment | No Base |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Output Torque | 527 lb-in |
| Lubrication | None |
| Output Configuration | Right Output |
| Use With | 718 |
| Motor Frame Size | B556C |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Center Distance | 1.75 in |
| Fan Cooled | No |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Rated Efficiency | 70% |
| Output Torque @ RPM | 527 in lb @ 1750 rpm, 440 in lb @ 1150 rpm |
| Input Configuration | C-Face Quilled |
| Washdown Duty | No |
| Material | Cast Iron, Standard Paint |
| Reduction Type | Single |
| Shaft Assembly Code | J |
| Frame Size | 56C |
| Box Height | 5 3/4 in |
| Weight | 19.1 LB |
| EAN or UPC | 781711519509 |
