Boston Gear
F7721-15-B5-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834959
- 1.50 Input Motor hp
- 700 Series
- 2.06 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Overhung Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Output (Shaft or Bore) Size | 1 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Lubrication | None |
| Motor HP | 0.75 hp |
| Motor Frame Size | B556C |
| Family Name | F |
| Input HP @ RPM | 1.06 hp @ 1150 rpm, 1.72 hp @ 1750 rpm |
| Output Torque Rating Range [Max] | 999 lb-in, 109 Nm |
| Base Mounting Attachment | No Base |
| Max. Thrust Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Input Power Rating | 1.72 hp, 1.283 kW |
| Shaft Assembly Code | H |
| Output Torque Rating Range [Min] | 750 lb-in, 85 Nm |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Fan Cooled | No |
| Bolt Centers w/ Vertical Base Kits (in) | 8 3/8 x 4 7/8 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.13 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.81 in |
| Output Torque @ RPM | 752 in lb @ 1150 rpm, 840 in lb @ 1750 rpm |
| Base to Centerline of Output Shaft | 2.28 in |
| Torque Out @ 1750 rpm | 840 in lb |
| Base | No |
| Ratio | 15:1 |
| Input Motor HP | 1.50 |
| Center Distance Code | 721 |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Box Length | 6 in |
| Output Configuration | Left & Right Output |
| Max. Input HP @ 100 rpm | 0.13 hp |
| Worm Position | Universal |
| Media Mapping Output | H |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Speed | 116.7 rpm |
| Standard | AGMA Service Class I |
| Reduction Type | Single |
| Base to Centerline of Input Shaft | 4 11/32 in |
| Input Configuration | C-Face Quilled |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 8.63 x 2.63 |
| Box Width | 5 3/16 in |
| Output Shaft | Solid |
| Housing Material | Cast Iron |
| Media Mapping Style | F |
| Output Bore Shaft Dia. | 1 in |
| Frame Size | 56C |
| Output Torque | 841 lb-in |
| Bore Code | B5 |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.94 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Box Height | 6 3/8 in |
| Use With | 721 |
| Input (Shaft or Bore) Size | 5/8 in |
| Style | Right Angle |
| Rated Efficiency | 90% |
| Bolt Centers w/ Std. Base Kit (in) | 6 3/8 x 4 11/16 |
| Series | 700 |
| Washdown Duty | No |
| Torque Out @ 1150 rpm | 752 in lb |
| Center Distance | 2.0625 in |
| Max. Thrust Load @ 1150 rpm | 700 lb/in |
| Frame | 56C |
| Keyway Size | 3/16 x 3/32 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.88 in |
| Bolt Center | 5 in x 2 7/8 in |
| Max. Overhung Load @ 1750 rpm | 700 lb/in |
| Weight | 24.1 LB |
| EAN or UPC | 781711519615 |
