Boston Gear
F721-15-B7-J
700 Series 15:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870873
- 1.50 Input Motor hp
- 700 Series
- 2.06 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Use With | 721 |
| Input HP @ RPM | 1.06 hp @ 1150 rpm, 1.72 hp @ 1750 rpm |
| Lubrication | None |
| Output Speed | 116.7 rpm |
| Box Width | 5 3/16 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Ratio | 15:1 |
| Output Shaft | Solid |
| Frame | 140TC, 180C |
| Bolt Centers w/ Vertical Base Kits (in) | 8 3/8 x 4 7/8 |
| Bolt Centers w/ Std. Base Kit (in) | 6 3/8 x 4 11/16 |
| Media Mapping Output | J |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 8.63 x 2.63 |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Input Motor HP | 1.50 |
| Box Length | 6 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Base Mounting Attachment | No Base |
| Reduction Type | Single |
| Family Name | F |
| Torque Out @ 1750 rpm | 840 in lb |
| Output Configuration | Right Output |
| Input Configuration | C-Face Quilled |
| Max. Input HP @ 100 rpm | 0.13 hp |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.13 in |
| Frame Size | 140TC, 180C |
| Keyway Size | 3/16 x 3/32 |
| Output Torque Rating Range [Max] | 999 lb-in, 109 Nm |
| Center Distance Code | 721 |
| Input Power Rating | 1.72 hp, 1.283 kW |
| Housing Material | Cast Iron |
| Motor HP | 1 1/2 hp |
| Output Torque | 841 lb-in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.94 in |
| Max. Thrust Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Max. Overhung Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/Std. Base Kit | 4.81 in |
| Bore Code | B7 |
| Max. Overhung Load @ 1750 rpm | 700 lb/in |
| Series | 700 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Fan Cooled | No |
| Center Distance | 2.0625 in |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Style | Right Angle |
| Base | No |
| Torque Out @ 1150 rpm | 752 in lb |
| Material | Cast Iron, Standard Paint |
| Max. Thrust Load @ 1150 rpm | 700 lb/in |
| Bolt Center | 5 in x 2 7/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.88 in |
| Output Torque @ RPM | 752 in lb @ 1150 rpm, 840 in lb @ 1750 rpm |
| Rated Efficiency | 90% |
| Motor Application | General Purpose |
| Worm Position | Universal |
| Motor Frame Size | B7140TC180C |
| Shaft Assembly Code | J |
| Box Height | 6 3/8 in |
| Media Mapping Style | F |
| Output Bore Shaft Dia. | 1 in |
| Output (Shaft or Bore) Size | 1 in |
| Washdown Duty | No |
| Output Shaft Projection | Solid Right Output |
| Base to Centerline of Input Shaft | 4 11/32 in |
| Output Torque Rating Range [Min] | 750 lb-in, 85 Nm |
| Base to Centerline of Output Shaft | 2.28 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Weight | 24.1 LB |
| EAN or UPC | 781711525869 |
