Boston Gear
F721-20-B5-H
700 Series 20:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809817
- 1 Input Motor hp
- 700 Series
- 2.06 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Media Mapping Style | F |
| Output Shaft Projection | Solid Double Projecting Output |
| Motor Frame Size | B556C |
| Box Width | 5 3/16 in |
| Base | No |
| Keyway Size | 3/16 x 3/32 |
| Fan Cooled | No |
| Material | Cast Iron, Standard Paint |
| Shaft Assembly Code | H |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Max. Overhung Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Box Height | 6 3/8 in |
| Base Mounting Attachment | No Base |
| Family Name | F |
| Base to Centerline of Output Shaft | 2.28 in |
| Style | Right Angle |
| Media Mapping Output | H |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 8.63 x 2.63 |
| Box Length | 6 in |
| Output Torque Rating Range [Max] | 999 lb-in, 109 Nm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Center Distance Code | 721 |
| Max. Thrust Load @ 1150 rpm | 700 lb/in |
| Lubrication | None |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.94 in |
| Washdown Duty | No |
| Output Bore Shaft Dia. | 1 in |
| Input Power Rating | 1.4 hp, 1.044 kW |
| Max. Input HP @ 100 rpm | 0.11 hp |
| Bolt Center | 5 in x 2 7/8 in |
| Input Motor HP | 1 |
| Output Torque Rating Range [Min] | 750 lb-in, 85 Nm |
| Base to Shaft Center Height w/Std. Base Kit | 4.81 in |
| Output Torque @ RPM | 782 in lb @ 1150 rpm, 892 in lb @ 1750 rpm |
| Output Torque | 892 lb-in |
| Torque Out @ 1150 rpm | 782 in lb |
| Output Shaft | Solid |
| Motor Application | General Purpose |
| Input Configuration | C-Face Quilled |
| Series | 700 |
| Torque Out @ 1750 rpm | 892 in lb |
| Max. Thrust Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Standard | AGMA Service Class II |
| Max. Overhung Load @ 1750 rpm | 700 lb/in |
| Input (Shaft or Bore) Size | 5/8 in |
| Center Distance | 2.0625 in |
| Input HP @ RPM | 0.86 hp @ 1150 rpm, 1.4 hp @ 1750 rpm |
| Frame Size | 56C |
| Housing Material | Cast Iron |
| Output (Shaft or Bore) Size | 1 in |
| Motor HP | 1 hp |
| Base to Centerline of Input Shaft | 4 11/32 in |
| Rated Efficiency | 88% |
| Worm Position | Universal |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.13 in |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| HP @ RPM | 1 hp @ 1800 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 8 3/8 x 4 7/8 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.88 in |
| Use With | 721 |
| Bore Code | B5 |
| Output Speed | 87.5 rpm |
| Ratio | 20:1 |
| Frame | 56C |
| Bolt Centers w/ Std. Base Kit (in) | 6 3/8 x 4 11/16 |
| Reduction Type | Single |
| Output Configuration | Left & Right Output |
| Weight | 24.1 LB |
| EAN or UPC | 781711519646 |
