Boston Gear
F721-5-B7-H
700 Series 5:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805905
- 2 Input Motor hp
- 700 Series
- 2.06 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Standard | AGMA Service Class II |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Box Width | 5 3/16 in |
| Output Shaft | Solid |
| Housing Material | Cast Iron |
| Center Distance | 2.0625 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.13 in |
| Shaft Assembly Code | H |
| Box Height | 6 3/8 in |
| Max. Overhung Load @ 1750 rpm | 700 lb/in |
| Output Torque @ RPM | 575 in lb @ 1150 rpm, 620 in lb @ 1750 rpm |
| Lubrication | None |
| Fan Cooled | No |
| Style | Right Angle |
| HP @ RPM | 3 hp @ 1800 rpm |
| Output (Shaft or Bore) Size | 1 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 8.63 x 2.63 |
| Input (Shaft or Bore) Size | 7/8 in |
| Washdown Duty | No |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.88 in |
| Ratio | 5:1 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input Motor HP | 2 |
| Reduction Type | Single |
| Box Length | 6 in |
| Torque Out @ 1150 rpm | 575 in lb |
| Motor Frame Size | B7140TC180C |
| Base to Centerline of Output Shaft | 2.28 in |
| Media Mapping Output | H |
| Output Torque | 620 lb-in |
| Center Distance Code | 721 |
| Material | Cast Iron, Standard Paint |
| Input Power Rating | 3.66 hp, 2.729 kW |
| Bolt Center | 5 in x 2 7/8 in |
| Keyway Size | 3/16 x 3/32 |
| Media Mapping Style | F |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Output Speed | 350 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 8 3/8 x 4 7/8 |
| Use With | 721 |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Output Configuration | Left & Right Output |
| Frame | 140TC, 180C |
| Output Bore Shaft Dia. | 1 in |
| Max. Thrust Load @ 1150 rpm | 700 lb/in |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 6 3/8 x 4 11/16 |
| Base Mounting Attachment | No Base |
| Worm Position | Universal |
| Output Shaft Projection | Solid Double Projecting Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.94 in |
| Max. Thrust Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.3 hp |
| Base | No |
| Max. Overhung Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Base to Centerline of Input Shaft | 4 11/32 in |
| Input Configuration | C-Face Quilled |
| Motor HP | 2 hp |
| Series | 700 |
| Rated Efficiency | 94% |
| Input HP @ RPM | 2.33 hp @ 1150 rpm, 3.66 hp @ 1750 rpm |
| Bore Code | B7 |
| Motor Application | General Purpose |
| Torque Out @ 1750 rpm | 620 in lb |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Base to Shaft Center Height w/Std. Base Kit | 4.81 in |
| Family Name | F |
| Frame Size | 140TC, 180C |
| Weight | 24.1 LB |
| EAN or UPC | 781711519523 |
