Boston Gear
F721-5-B7-J
700 Series 5:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101523860
- 2 Input Motor hp
- 700 Series
- 2.06 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Unlimited shelf life
- Specially refined aggregate provides an irregular surface profile
| Input Power Rating | 3.66 hp, 2.729 kW |
| Input Configuration | C-Face Quilled |
| Box Length | 6 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.94 in |
| Output Speed | 350 rpm |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Bore Code | B7 |
| Max. Thrust Load @ 1150 rpm | 700 lb/in |
| Fan Cooled | No |
| Torque Out @ 1150 rpm | 575 in lb |
| Housing Material | Cast Iron |
| Output Torque @ RPM | 575 in lb @ 1150 rpm, 620 in lb @ 1750 rpm |
| Max. Overhung Load @ 1750 rpm | 700 lb/in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.13 in |
| Input HP @ RPM | 2.33 hp @ 1150 rpm, 3.66 hp @ 1750 rpm |
| Washdown Duty | No |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input Motor HP | 2 |
| Max. Overhung Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Ratio | 5:1 |
| Base Mounting Attachment | No Base |
| Use With | 721 |
| Output Shaft Projection | Solid Right Output |
| Keyway Size | 3/16 x 3/32 |
| Base to Centerline of Input Shaft | 4 11/32 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Output Configuration | Right Output |
| Media Mapping Output | J |
| Shaft Assembly Code | J |
| Base | No |
| HP @ RPM | 3 hp @ 1800 rpm |
| Motor HP | 2 hp |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.88 in |
| Bolt Centers w/ Vertical Base Kits (in) | 8 3/8 x 4 7/8 |
| Center Distance | 2.0625 in |
| Max. Input HP @ 100 rpm | 0.3 hp |
| Bolt Centers w/ Std. Base Kit (in) | 6 3/8 x 4 11/16 |
| Frame | 140TC, 180C |
| Standard | AGMA Service Class II |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Series | 700 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 8.63 x 2.63 |
| Motor Frame Size | B7140TC180C |
| Motor Application | General Purpose |
| Box Height | 6 3/8 in |
| Family Name | F |
| Media Mapping Style | F |
| Output Bore Shaft Dia. | 1 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.81 in |
| Base to Centerline of Output Shaft | 2.28 in |
| Rated Efficiency | 94% |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Torque Out @ 1750 rpm | 620 in lb |
| Reduction Type | Single |
| Output Torque | 620 lb-in |
| Output Shaft | Solid |
| Bolt Center | 5 in x 2 7/8 in |
| Center Distance Code | 721 |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Style | Right Angle |
| Worm Position | Universal |
| Lubrication | None |
| Box Width | 5 3/16 in |
| Output (Shaft or Bore) Size | 1 in |
| Max. Thrust Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Frame Size | 140TC, 180C |
| Weight | 24.1 LB |
| EAN or UPC | 781711519530 |
