Find a Service Center
Boston Gear
F724-10-B7-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809818
- 3 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Shaft | Solid |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Shaft Projection | Solid Left Output |
| Input HP @ RPM | 2.09 hp @ 1150 rpm, 3.18 hp @ 1750 rpm |
| Output Bore Shaft Dia. | 1.125 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Frame Size | 140TC, 180C |
| Input (Shaft or Bore) Size | 7/8 in |
| Rated Efficiency | 93% |
| Max. Input HP @ 100 rpm | 0.27 hp |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Standard | AGMA Service Class I |
| Torque Out @ 1750 rpm | 1069 in lb |
| Lubrication | None |
| Reduction Type | Single |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Bolt Center | 5 in x 2 7/8 in |
| Output Speed | 175 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Motor HP | 2 hp |
| Use With | 724 |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Fan Cooled | No |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Base Mounting Attachment | No Base |
| Center Distance Code | 724 |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Ratio | 10:1 |
| Bore Code | B7 |
| Style | Right Angle |
| Housing Material | Cast Iron |
| Input Configuration | C-Face Quilled |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Output Torque | 1069 lb-in |
| HP @ RPM | 3 hp @ 1800 rpm |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Washdown Duty | No |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Media Mapping Output | G |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Box Length | 6 3/8 in |
| Worm Position | Universal |
| Media Mapping Style | F |
| Box Height | 6 15/16 in |
| Input Power Rating | 3.18 hp, 2.371 kW |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Center Distance | 2.375 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Frame Size | B7140TC180C |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Series | 700 |
| Frame | 140TC, 180C |
| Input Motor HP | 3 |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Output Torque @ RPM | 1025 in lb @ 1150 rpm, 1069 in lb @ 1750 rpm |
| Box Width | 5 7/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Material | Cast Iron, Standard Paint |
| Output Configuration | Left Output |
| Torque Out @ 1150 rpm | 1025 in lb |
| Family Name | F |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Weight | 30.1 LB |
| EAN or UPC | 781711519844 |
