Find a Service Center
Boston Gear
F724-10-B7-H
700 Series 10:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834960
- 3 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Lubrication | None |
| Output Torque @ RPM | 1025 in lb @ 1150 rpm, 1069 in lb @ 1750 rpm |
| Frame | 140TC, 180C |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Torque Out @ 1750 rpm | 1069 in lb |
| Box Height | 6 15/16 in |
| Frame Size | 140TC, 180C |
| Output Torque | 1069 lb-in |
| Standard | AGMA Service Class I |
| Family Name | F |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Motor Application | General Purpose |
| Shaft Assembly Code | H |
| Series | 700 |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Motor HP | 2 hp |
| Input Configuration | C-Face Quilled |
| Material | Cast Iron, Standard Paint |
| Style | Right Angle |
| Input (Shaft or Bore) Size | 7/8 in |
| Base Mounting Attachment | No Base |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.27 hp |
| Reduction Type | Single |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Use With | 724 |
| Media Mapping Style | F |
| Media Mapping Output | H |
| Output Shaft Projection | Solid Double Projecting Output |
| Input Motor HP | 3 |
| Input HP @ RPM | 2.09 hp @ 1150 rpm, 3.18 hp @ 1750 rpm |
| Housing Material | Cast Iron |
| HP @ RPM | 3 hp @ 1800 rpm |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Input Power Rating | 3.18 hp, 2.371 kW |
| Output Speed | 175 rpm |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Center Distance | 2.375 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Rated Efficiency | 93% |
| Output Configuration | Left & Right Output |
| Washdown Duty | No |
| Bolt Center | 5 in x 2 7/8 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Worm Position | Universal |
| Box Length | 6 3/8 in |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Keyway Size | 3/16 x 3/32 |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Fan Cooled | No |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Output Bore Shaft Dia. | 1.125 in |
| Ratio | 10:1 |
| Box Width | 5 7/16 in |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Torque Out @ 1150 rpm | 1025 in lb |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Center Distance Code | 724 |
| Motor Frame Size | B7140TC180C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bore Code | B7 |
| Weight | 30.1 LB |
| EAN or UPC | 781711519851 |
