Find a Service Center
Boston Gear
F7724-15-B7-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809115
- 2 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Power Rating | 2.34 hp, 1.745 kW |
| Torque Out @ 1750 rpm | 1159 in lb |
| Input Configuration | C-Face Quilled |
| Output Torque | 1159 lb-in |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Style | Right Angle |
| Standard | AGMA Service Class I |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Input (Shaft or Bore) Size | 7/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Motor HP | 2 hp |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Fan Cooled | No |
| Box Height | 6 15/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Rated Efficiency | 92% |
| Frame Size | 140TC, 180C |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Input Motor HP | 2 |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Motor Frame Size | B7140TC180C |
| Reduction Type | Single |
| Center Distance | 2.375 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Ratio | 15:1 |
| Use With | 724 |
| Housing Material | Cast Iron |
| Box Width | 5 7/16 in |
| Media Mapping Style | F |
| Max. Input HP @ 100 rpm | 0.19 hp |
| Series | 700 |
| Washdown Duty | No |
| Output Torque @ RPM | 1060 in lb @ 1150 rpm, 1159 in lb @ 1750 rpm |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Output Configuration | Left Output |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base Mounting Attachment | No Base |
| Center Distance Code | 724 |
| Box Length | 6 3/8 in |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Input HP @ RPM | 1.51 hp @ 1150 rpm, 2.34 hp @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Base to Centerline of Output Shaft | 2 1/2 in |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Bore Code | B7 |
| Torque Out @ 1150 rpm | 1060 in lb |
| Output Speed | 116.7 rpm |
| Output Shaft | Solid |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Worm Position | Universal |
| Output Bore Shaft Dia. | 1.125 in |
| Lubrication | None |
| Frame | 140TC, 180C |
| Media Mapping Output | G |
| Bolt Center | 5 in x 2 7/8 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Motor Application | General Purpose |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Shaft Assembly Code | G |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Family Name | F |
| Weight | 30.1 LB |
| EAN or UPC | 781711519905 |
