Find a Service Center
Boston Gear
F7724-25-B5-G
700 Series 25:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807808
- 1.50 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Ratio | 25:1 |
| Motor Application | General Purpose |
| Input HP @ RPM | 1.03 hp @ 1150 rpm, 1.55 hp @ 1750 rpm |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Output Shaft | Solid |
| Base Mounting Attachment | No Base |
| Bolt Center | 5 in x 2 7/8 in |
| Motor Frame Size | B556C |
| Lubrication | None |
| Fan Cooled | No |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Frame Size | 56C |
| Input Configuration | C-Face Quilled |
| Output Shaft Projection | Solid Left Output |
| Style | Right Angle |
| Reduction Type | Single |
| Washdown Duty | No |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Media Mapping Output | G |
| Output Bore Shaft Dia. | 1.125 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Output Torque | 1199 lb-in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Center Distance Code | 724 |
| Center Distance | 2.375 in |
| Box Height | 6 15/16 in |
| Motor HP | 1 hp |
| Housing Material | Cast Iron |
| Input Power Rating | 1.55 hp, 1.156 kW |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Speed | 70 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Torque Out @ 1750 rpm | 1199 in lb |
| Frame | 56C |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Media Mapping Style | F |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Rated Efficiency | 86% |
| Box Width | 5 7/16 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Standard | AGMA Service Class I |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Bore Code | B5 |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Output Configuration | Left Output |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Output Torque @ RPM | 1150 in lb @ 1150 rpm, 1199 in lb @ 1750 rpm |
| Family Name | F |
| Torque Out @ 1150 rpm | 1150 in lb |
| Input (Shaft or Bore) Size | 5/8 in |
| Input Motor HP | 1.50 |
| Shaft Assembly Code | G |
| Series | 700 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Box Length | 6 3/8 in |
| Use With | 724 |
| Weight | 30.1 LB |
| EAN or UPC | 781711519998 |
