Find a Service Center
Boston Gear
F724-25-B5-H
700 Series 25:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101854085
- 1.50 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Box Height | 6 15/16 in |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Housing Material | Cast Iron |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Output Speed | 70 rpm |
| Rated Efficiency | 86% |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Series | 700 |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Shaft Assembly Code | H |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Reduction Type | Single |
| Output Shaft | Solid |
| Ratio | 25:1 |
| Input HP @ RPM | 1.03 hp @ 1150 rpm, 1.55 hp @ 1750 rpm |
| Frame Size | 56C |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Media Mapping Output | H |
| Lubrication | None |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Family Name | F |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Length | 6 3/8 in |
| Style | Right Angle |
| Fan Cooled | No |
| Output Torque @ RPM | 1150 in lb @ 1150 rpm, 1199 in lb @ 1750 rpm |
| Input Power Rating | 1.55 hp, 1.156 kW |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Torque Out @ 1150 rpm | 1150 in lb |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Washdown Duty | No |
| Center Distance Code | 724 |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Motor Application | General Purpose |
| Output Torque | 1199 lb-in |
| Input Motor HP | 1.50 |
| Standard | AGMA Service Class I |
| Box Width | 5 7/16 in |
| Output Configuration | Left & Right Output |
| Output Bore Shaft Dia. | 1.125 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Keyway Size | 3/16 x 3/32 |
| Motor Frame Size | B556C |
| Motor HP | 1 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Use With | 724 |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Shaft Projection | Solid Double Projecting Output |
| Material | Cast Iron, Standard Paint |
| Bore Code | B5 |
| Worm Position | Universal |
| Torque Out @ 1750 rpm | 1199 in lb |
| Media Mapping Style | F |
| Base Mounting Attachment | No Base |
| Bolt Center | 5 in x 2 7/8 in |
| Input Configuration | C-Face Quilled |
| Center Distance | 2.375 in |
| Frame | 56C |
| Weight | 30.1 LB |
| EAN or UPC | 781711520000 |
