Find a Service Center
Boston Gear
F7724-25-B5-J
700 Series 25:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834712
- 1.50 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Power Rating | 1.55 hp, 1.156 kW |
| Base Mounting Attachment | No Base |
| Box Width | 5 7/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Keyway Size | 3/16 x 3/32 |
| Fan Cooled | No |
| Box Height | 6 15/16 in |
| Rated Efficiency | 86% |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Ratio | 25:1 |
| Torque Out @ 1150 rpm | 1150 in lb |
| Media Mapping Style | F |
| Family Name | F |
| Output Torque @ RPM | 1150 in lb @ 1150 rpm, 1199 in lb @ 1750 rpm |
| Output Shaft | Solid |
| Output Shaft Projection | Solid Right Output |
| Output Torque | 1199 lb-in |
| Washdown Duty | No |
| Style | Right Angle |
| Input HP @ RPM | 1.03 hp @ 1150 rpm, 1.55 hp @ 1750 rpm |
| Standard | AGMA Service Class I |
| Center Distance | 2.375 in |
| Reduction Type | Single |
| Output Speed | 70 rpm |
| Torque Out @ 1750 rpm | 1199 in lb |
| Series | 700 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Media Mapping Output | J |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Box Length | 6 3/8 in |
| Motor Application | General Purpose |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Bolt Center | 5 in x 2 7/8 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Use With | 724 |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Input Configuration | C-Face Quilled |
| Output Configuration | Right Output |
| Frame Size | 56C |
| Input Motor HP | 1.50 |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Shaft Assembly Code | J |
| Motor Frame Size | B556C |
| Center Distance Code | 724 |
| Input (Shaft or Bore) Size | 5/8 in |
| Bore Code | B5 |
| Housing Material | Cast Iron |
| Output Bore Shaft Dia. | 1.125 in |
| Lubrication | None |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Material | Cast Iron, Standard Paint |
| Frame | 56C |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Motor HP | 1 hp |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Worm Position | Universal |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Weight | 30.1 LB |
| EAN or UPC | 781711520017 |
