Find a Service Center
Boston Gear
F724-30-B5-H
700 Series 30:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805907
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Use of external guides or supports is strongly recommended for overhead mounting.
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Box Height | 6 15/16 in |
| Shaft Assembly Code | H |
| Motor HP | 1 hp |
| Washdown Duty | No |
| Input (Shaft or Bore) Size | 5/8 in |
| Media Mapping Style | F |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Output Torque | 1200 lb-in |
| Output Configuration | Left & Right Output |
| Style | Right Angle |
| Center Distance Code | 724 |
| Frame Size | 56C |
| Family Name | F |
| Housing Material | Cast Iron |
| Ratio | 30:1 |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Frame | 56C |
| Input Configuration | C-Face Quilled |
| Media Mapping Output | H |
| Motor Frame Size | B556C |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Center Distance | 2.375 in |
| Box Width | 5 7/16 in |
| Bore Code | B5 |
| Base Mounting Attachment | No Base |
| Fan Cooled | No |
| Torque Out @ 1150 rpm | 1170 in lb |
| Box Length | 6 3/8 in |
| Input Power Rating | 1.33 hp, 0.992 kW |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Standard | AGMA Service Class II |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Torque Out @ 1750 rpm | 1200 in lb |
| Input HP @ RPM | 0.89 hp @ 1150 rpm, 1.33 hp @ 1750 rpm |
| Base to Centerline of Input Shaft | 4.875 in |
| Rated Efficiency | 83% |
| Base to Centerline of Output Shaft | 2.5 in |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Worm Position | Universal |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Keyway Size | 3/16 x 3/32 |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Output Bore Shaft Dia. | 1.125 in |
| Reduction Type | Single |
| Material | Cast Iron, Standard Paint |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Use With | 724 |
| Output Shaft Projection | Solid Double Projecting Output |
| Bolt Center | 5 in x 2 7/8 in |
| Output Speed | 58.3 rpm |
| Output Shaft | Solid |
| Output Torque @ RPM | 1170 in lb @ 1150 rpm, 1200 in lb @ 1750 rpm |
| Input Motor HP | 1 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Motor Application | General Purpose |
| HP @ RPM | 1 hp @ 1800 rpm |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Series | 700 |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Weight | 30.1 LB |
| EAN or UPC | 781711520031 |
