Find a Service Center
Boston Gear
F724-40-B5-H
700 Series 40:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835797
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Not intended to be operated with each other, with internal gears, or with 11-tooth spur gears
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Reduction Type | Single |
| Torque Out @ 1750 rpm | 1206 in lb |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Ratio | 40:1 |
| Output Bore Shaft Dia. | 1.125 in |
| Motor Application | General Purpose |
| Frame | 56C |
| Motor Frame Size | B556C |
| Bolt Center | 5 in x 2 7/8 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Washdown Duty | No |
| Output Torque | 1206 lb-in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Box Height | 6 15/16 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Box Length | 6 3/8 in |
| Input Power Rating | 1.08 hp, 0.805 kW |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Housing Material | Cast Iron |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output Shaft | Solid |
| Frame Size | 56C |
| Output Torque @ RPM | 1160 in lb @ 1150 rpm, 1206 in lb @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Input Motor HP | 1 |
| Output Shaft Projection | Solid Double Projecting Output |
| Center Distance Code | 724 |
| Lubrication | None |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Material | Cast Iron, Standard Paint |
| Torque Out @ 1150 rpm | 1160 in lb |
| Bore Code | B5 |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Shaft Assembly Code | H |
| Use With | 724 |
| Input HP @ RPM | 0.7 hp @ 1150 rpm, 1.08 hp @ 1750 rpm |
| Output Configuration | Left & Right Output |
| Standard | AGMA Service Class I |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Media Mapping Output | H |
| Worm Position | Universal |
| Fan Cooled | No |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Family Name | F |
| Style | Right Angle |
| Media Mapping Style | F |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Series | 700 |
| Center Distance | 2.375 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Base Mounting Attachment | No Base |
| Max. Input HP @ 100 rpm | 0.11 hp |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Output Speed | 43.8 rpm |
| Motor HP | 3/4 hp |
| Rated Efficiency | 77% |
| Keyway Size | 3/16 x 3/32 |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Box Width | 5 7/16 in |
| Weight | 30.1 LB |
| EAN or UPC | 781711520062 |
