Find a Service Center
Boston Gear
F724-60-B5-H
700 Series 60:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101833980
- 0.75 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Shaft Projection | Solid Double Projecting Output |
| Input Power Rating | 0.73 hp, 0.544 kW |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Output Bore Shaft Dia. | 1.125 in |
| Series | 700 |
| Media Mapping Output | H |
| Box Length | 6 3/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Ratio | 60:1 |
| Standard | AGMA Service Class I |
| Shaft Assembly Code | H |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Input HP @ RPM | 0.49 hp @ 1150 rpm, 0.73 hp @ 1750 rpm |
| Washdown Duty | No |
| Material | Cast Iron, Standard Paint |
| Input Configuration | C-Face Quilled |
| Use With | 724 |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Rated Efficiency | 71% |
| Motor HP | 1/2 hp |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Torque Out @ 1150 rpm | 1040 in lb |
| Output Torque @ RPM | 1040 in lb @ 1150 rpm, 1128 in lb @ 1750 rpm |
| Torque Out @ 1750 rpm | 1128 in lb |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Frame Size | 56C |
| Bolt Center | 5 in x 2 7/8 in |
| Fan Cooled | No |
| Output Shaft | Solid |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Keyway Size | 3/16 x 3/32 |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Box Height | 6 15/16 in |
| Media Mapping Style | F |
| Motor Frame Size | B556C |
| Family Name | F |
| Output Speed | 29.2 rpm |
| Reduction Type | Single |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Style | Right Angle |
| Lubrication | None |
| Output Configuration | Left & Right Output |
| Center Distance | 2.375 in |
| Motor Application | General Purpose |
| Output Torque | 1128 lb-in |
| Box Width | 5 7/16 in |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Center Distance Code | 724 |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Worm Position | Universal |
| Base Mounting Attachment | No Base |
| Frame | 56C |
| Housing Material | Cast Iron |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Bore Code | B5 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Input Motor HP | 0.75 |
| Max. Input HP @ 100 rpm | 0.073 hp |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Weight | 30.1 LB |
| EAN or UPC | 781711520123 |
