Boston Gear
F7726-15-B7-J
700 Series 15:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834138
- 3 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Speed | 116.7 rpm |
| Frame Size | 140TC, 180C |
| Washdown Duty | No |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Media Mapping Output | J |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Bore Shaft Dia. | 1.125 in |
| Series | 700 |
| Center Distance Code | 726 |
| Keyway Size | 3/16 x 3/32 |
| Housing Material | Cast Iron |
| Motor Frame Size | B7140TC180C |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Use With | 726 |
| Output Torque Rating Range [Max] | 1499 lb-in, 234 Nm |
| Bore Code | B7 |
| Motor Application | General Purpose |
| Input Configuration | C-Face Quilled |
| Output Configuration | Right Output |
| Output Shaft | Solid |
| Lubrication | None |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Center Distance | 2.625 in |
| Input Power Rating | 2.95 hp, 2.2 kW |
| Rated Efficiency | 92% |
| Motor HP | 2 hp |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Material | Cast Iron, Standard Paint |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Style | Right Angle |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Torque Out @ 1750 rpm | 1465 in lb |
| Shaft Assembly Code | J |
| Base Mounting Attachment | No Base |
| Media Mapping Style | F |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Output Torque @ RPM | 1425 in lb @ 1150 rpm, 1465 in lb @ 1750 rpm |
| Base to Centerline of Output Shaft | 2.9375 in |
| Family Name | F |
| Max. Input HP @ 100 rpm | 0.28 hp |
| Output Shaft Projection | Solid Right Output |
| Output Torque Rating Range [Min] | 1000 lb-in, 160 Nm |
| Output Torque | 1466 lb-in |
| Input Motor HP | 3 |
| Input (Shaft or Bore) Size | 7/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Reduction Type | Single |
| HP @ RPM | 2 hp @ 1800 rpm |
| Worm Position | Universal |
| Torque Out @ 1150 rpm | 1425 in lb |
| Frame | 140TC, 180C |
| Box Height | 8 in |
| Base to Centerline of Input Shaft | 5.5625 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Ratio | 15:1 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Input HP @ RPM | 2.01 hp @ 1150 rpm, 2.95 hp @ 1750 rpm |
| Standard | AGMA Service Class I |
| Fan Cooled | No |
| Box Width | 5.9 in |
| Box Length | 7 3/8 in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520253 |
