Boston Gear
F7726-20-B5-H
700 Series 20:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101854816
- 2 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Media Mapping Style | F |
| Ratio | 20:1 |
| Output Configuration | Left & Right Output |
| Base Mounting Attachment | No Base |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Motor Frame Size | B556C |
| Standard | AGMA Service Class I |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Lubrication | None |
| Output Bore Shaft Dia. | 1.125 in |
| Series | 700 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Washdown Duty | No |
| Rated Efficiency | 88% |
| Center Distance | 2.625 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| HP @ RPM | 2 hp @ 1800 rpm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Input Motor HP | 2 |
| Material | Cast Iron, Standard Paint |
| Box Width | 5.9 in |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Family Name | F |
| Torque Out @ 1150 rpm | 1500 in lb |
| Style | Right Angle |
| Frame | 56C |
| Output Shaft | Solid |
| Output Speed | 87.5 rpm |
| Input Configuration | C-Face Quilled |
| Worm Position | Universal |
| Motor HP | 1 hp |
| Output Torque Rating Range [Min] | 1000 lb-in, 160 Nm |
| Media Mapping Output | H |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Input Power Rating | 2.34 hp, 1.745 kW |
| Shaft Assembly Code | H |
| Output Torque Rating Range [Max] | 1499 lb-in, 234 Nm |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Housing Material | Cast Iron |
| Box Length | 7 3/8 in |
| Torque Out @ 1750 rpm | 1483 in lb |
| Fan Cooled | No |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Center Distance Code | 726 |
| Bore Code | B5 |
| Motor Application | General Purpose |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Keyway Size | 3/16 x 3/32 |
| Use With | 726 |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.2 hp |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Reduction Type | Single |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Torque | 1483 lb-in |
| Output Torque @ RPM | 1483 in lb @ 1750 rpm, 1500 in lb @ 1150 rpm |
| Frame Size | 56C |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Input HP @ RPM | 1.63 hp @ 1150 rpm, 2.34 hp @ 1750 rpm |
| Box Height | 8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Weight | 41.1 LB |
| EAN or UPC | 781711520277 |
