Boston Gear
F7726-20-B7-G
700 Series 20:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101856458
- 2 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Style | Right Angle |
| Frame | 140TC, 180C |
| Fan Cooled | No |
| Output Shaft Projection | Solid Left Output |
| Box Width | 5.9 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Washdown Duty | No |
| Material | Cast Iron, Standard Paint |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Series | 700 |
| Output Speed | 87.5 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Torque | 1483 lb-in |
| Standard | AGMA Service Class I |
| Frame Size | 140TC, 180C |
| Base Mounting Attachment | No Base |
| Lubrication | None |
| Reduction Type | Single |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Center Distance Code | 726 |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Torque Out @ 1750 rpm | 1483 in lb |
| Media Mapping Style | F |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Bore Code | B7 |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Input Power Rating | 2.34 hp, 1.745 kW |
| HP @ RPM | 2 hp @ 1800 rpm |
| Max. Input HP @ 100 rpm | 0.2 hp |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Output RPM @ Input RPM | 88 rpm @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Worm Position | Universal |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Media Mapping Output | G |
| Use With | 726 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Torque Out @ 1150 rpm | 1500 in lb |
| Family Name | F |
| Output Torque Rating Range [Min] | 1000 lb-in, 160 Nm |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Input Motor HP | 2 |
| Input (Shaft or Bore) Size | 7/8 in |
| Input HP @ RPM | 1.63 hp @ 1150 rpm, 2.34 hp @ 1750 rpm |
| Box Height | 8 in |
| Output Shaft | Solid |
| Output Configuration | Left Output |
| Output Torque Rating Range [Max] | 1499 lb-in, 234 Nm |
| Box Length | 7 3/8 in |
| Output RPM @ 1750 rpm Input | 87.5 rpm |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Motor Frame Size | B7140TC180C |
| Rated Efficiency | 88% |
| Motor HP | 2 hp |
| Output Bore Shaft Dia. | 1.125 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Input Configuration | C-Face Quilled |
| Center Distance | 2.625 in |
| Ratio | 20:1 |
| Housing Material | Cast Iron |
| Output Torque @ RPM | 1483 in lb @ 1750 rpm, 1500 in lb @ 1150 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520291 |
