Boston Gear
F726-40-B5-J
700 Series 40:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101350434
- 1 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input HP @ RPM | 1.33 hp @ 1750 rpm, 0.89 hp @ 1150 rpm |
| Max. Thrust Load @ RPM | 900 lb/in @ 1750 rpm, 900 lb/in @ 1150 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4 3/4 in |
| Output RPM @ 1750 rpm Input | 44 rpm |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Fan Cooled | No |
| Series | 700 |
| Motor HP | 1 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Box Width | 5.9 in |
| Frame | 56C |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Motor Application | General Purpose |
| Box Height | 8 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Box Length | 7 3/8 in |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Output Configuration | Right Output |
| Keyway Size | 3/16 x 3/32 |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Base Mounting Attachment | No Base |
| Family Name | F |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Input Motor HP | 1 |
| Output Torque | 1512 lb-in |
| Shaft Assembly Code | J |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Torque Out @ 1750 rpm | 1512 in lb |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Center Distance Code | 726 |
| Worm Position | Universal |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Frame Size | 56C |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Standard | AGMA Service Class II |
| Media Mapping Style | F |
| Material | Cast Iron, Standard Paint |
| Lubrication | None |
| Rated Efficiency | 79% |
| Style | Right Angle |
| Input (Shaft or Bore) Size | 5/8 in |
| Bolt Center Length x Bolt Center Width | 6 3/8 in x 3 3/8 in |
| Use With | 726 |
| Washdown Duty | No |
| Housing Material | Cast Iron |
| Output Speed | 43.8 rpm |
| Output Bore Shaft Dia. | 1.125 in |
| Input Configuration | C-Face Quilled |
| Ratio | 40:1 |
| Input Power Rating | 1.33 hp, 0.992 kW |
| Output Shaft Projection | Solid Right Output |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1750 rpm, 1000 lb/in @ 1150 rpm |
| Media Mapping Output | J |
| Reduction Type | Single |
| Center Distance | 2.625 in |
| Bolt Pattern | 6.38 x 3.38 |
| Motor Frame Size | B556C |
| Bore Code | B5 |
| Output Torque @ RPM | 1512 in lb @ 1750 rpm, 1500 in lb @ 1150 rpm |
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Torque Out @ 1150 rpm | 1500 in lb |
| Output Shaft | Solid |
| Weight | 41.1 LB |
| EAN or UPC | 781711520468 |
