Boston Gear
F726-5-B9-G
700 Series 5:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101856457
- 5 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Lubrication | None |
| Box Length | 7 3/8 in |
| Ratio | 5:1 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Family Name | F |
| Input Power Rating | 6.11 hp, 4.556 kW |
| Torque Out @ 1750 rpm | 1034 in lb |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Bore Code | B9 |
| Media Mapping Style | F |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Reduction Type | Single |
| Frame | 180TC, 210C |
| Frame Size | 180TC, 210C |
| Input HP @ RPM | 4.05 hp @ 1150 rpm, 6.11 hp @ 1750 rpm |
| Motor Frame Size | B9180TC210C |
| Max. Input HP @ 100 rpm | 0.58 hp |
| Motor HP | 5 hp |
| Input Motor HP | 5 |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Output Configuration | Left Output |
| Rated Efficiency | 94% |
| Output Speed | 350 rpm |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Style | Right Angle |
| Output Torque | 1034 lb-in |
| Worm Position | Universal |
| Output Bore Shaft Dia. | 1.125 in |
| Box Height | 8 in |
| Keyway Size | 1/4 x 1/8 |
| Output Shaft Projection | Solid Left Output |
| Input Configuration | C-Face Quilled |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| HP @ RPM | 5 hp @ 1800 rpm |
| Torque Out @ 1150 rpm | 1000 in lb |
| Base Mounting Attachment | No Base |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Fan Cooled | No |
| Shaft Assembly Code | G |
| Center Distance Code | 726 |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Series | 700 |
| Standard | AGMA Service Class I |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Motor Application | General Purpose |
| Center Distance | 2.625 in |
| Washdown Duty | No |
| Use With | 726 |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Output Torque @ RPM | 1000 in lb @ 1150 rpm, 1034 in lb @ 1750 rpm |
| Box Width | 5.9 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Media Mapping Output | G |
| Output Shaft | Solid |
| Material | Cast Iron, Standard Paint |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Housing Material | Cast Iron |
| Weight | 41.1 LB |
| EAN or UPC | 781711520147 |
