Boston Gear
F726-5-B9-J
700 Series 5:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809380
- 5 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Ratio | 5:1 |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Frame Size | 180TC, 210C |
| Input Motor HP | 5 |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Box Width | 5.9 in |
| Output Speed | 350 rpm |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| HP @ RPM | 5 hp @ 1800 rpm |
| Motor Frame Size | B9180TC210C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Application | General Purpose |
| Base Mounting Attachment | No Base |
| Series | 700 |
| Style | Right Angle |
| Torque Out @ 1150 rpm | 1000 in lb |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Material | Cast Iron, Standard Paint |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Motor HP | 5 hp |
| Output Bore Shaft Dia. | 1.125 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Standard | AGMA Service Class I |
| Output Shaft | Solid |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Center Distance | 2.625 in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Media Mapping Style | F |
| Input HP @ RPM | 4.05 hp @ 1150 rpm, 6.11 hp @ 1750 rpm |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Lubrication | None |
| Use With | 726 |
| Center Distance Code | 726 |
| Washdown Duty | No |
| Torque Out @ 1750 rpm | 1034 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Frame | 180TC, 210C |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Rated Efficiency | 94% |
| Shaft Assembly Code | J |
| Fan Cooled | No |
| Reduction Type | Single |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Box Length | 7 3/8 in |
| Output Shaft Projection | Solid Right Output |
| Worm Position | Universal |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Output Configuration | Right Output |
| Housing Material | Cast Iron |
| Input Power Rating | 6.11 hp, 4.556 kW |
| Box Height | 8 in |
| Output Torque | 1034 lb-in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.58 hp |
| Input Configuration | C-Face Quilled |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Keyway Size | 1/4 x 1/8 |
| Output Torque @ RPM | 1000 in lb @ 1150 rpm, 1034 in lb @ 1750 rpm |
| Bore Code | B9 |
| Media Mapping Output | J |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Family Name | F |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Weight | 41.1 LB |
| EAN or UPC | 781711520161 |
