Boston Gear
F7732-10E-B9-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101881926
- 5 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input (Shaft or Bore) Size | 1 1/8 in |
| Material | Cast Iron, Standard Paint |
| Frame | 180TC, 210C |
| Bolt Center | 7 1/2 in x 4 in |
| Family Name | F |
| Box Width | 7 9/16 in |
| Motor HP | 5 hp |
| Center Distance Code | 732 |
| Worm Position | Universal |
| Output Shaft Projection | Solid Left Output |
| Media Mapping Style | F |
| Keyway Size | 1/4 x 1/8 |
| Input Configuration | C-Face Quilled |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Use With | 732 |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Output Torque | 2532 lb-in |
| Output Speed | 175 rpm |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Box Length | 9 in |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Input HP @ RPM | 5.03 hp @ 1150 rpm, 7.75 hp @ 1750 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Output Configuration | Left Output |
| Housing Material | Cast Iron |
| Ratio | 10:1 |
| Standard | AGMA Service Class II |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Output Bore Shaft Dia. | 1.375 in |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Installed Options | Fan |
| Frame Size | 180TC, 210C |
| Rated Efficiency | 91% |
| Max. Input HP @ 100 rpm | 0.62 hp |
| Output Torque Rating Range [Min] | 2500 lb-in, 235 Nm |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Input Motor HP | 5 |
| Motor Frame Size | B9180TC210C |
| Output Shaft | Solid |
| Washdown Duty | No |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Box Height | 9 3/8 in |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Motor Application | General Purpose |
| Media Mapping Output | G |
| Torque Out @ 1750 rpm | 2532 in lb |
| Center Distance | 3.25 in |
| HP @ RPM | 5 hp @ 1800 rpm |
| Lubrication | None |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Style | Right Angle |
| Bore Code | B9 |
| Reduction Type | Single |
| Torque Out @ 1150 rpm | 2450 in lb |
| Output Torque @ RPM | 2450 in lb @ 1150 rpm, 2532 in lb @ 1750 rpm |
| Input Power Rating | 7.75 hp, 5.779 kW |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Fan Cooled | Yes |
| Output Torque Rating Range [Max] | 3499 lb-in, 309 Nm |
| Series | 700 |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Shaft Assembly Code | G |
| Base Mounting Attachment | No Base |
| Weight | 66.1 LB |
| EAN or UPC | 781711533420 |
