Boston Gear
F7732-15E-B9-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101871111
- 5 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Installed Options | Fan |
| Use With | 732 |
| Worm Position | Universal |
| Output Speed | 116.7 rpm |
| Ratio | 15:1 |
| Input Motor HP | 5 |
| Style | Right Angle |
| Box Length | 9 in |
| Input (Shaft or Bore) Size | 1 1/8 in |
| Output Shaft Projection | Solid Left Output |
| Frame | 180TC, 210C |
| Box Height | 9 3/8 in |
| Center Distance Code | 732 |
| Input Power Rating | 5.8 hp, 4.325 kW |
| Media Mapping Style | F |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Fan Cooled | Yes |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Reduction Type | Single |
| Input Configuration | C-Face Quilled |
| Output Torque Rating Range [Max] | 3499 lb-in, 399 Nm |
| Torque Out @ 1150 rpm | 2600 in lb |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| HP @ RPM | 3 hp @ 1800 rpm |
| Housing Material | Cast Iron |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Shaft Assembly Code | G |
| Rated Efficiency | 89% |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Configuration | Left Output |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Output Torque @ RPM | 2600 in lb @ 1150 rpm, 2782 in lb @ 1750 rpm |
| Bolt Center | 7 1/2 in x 4 in |
| Output Shaft | Solid |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Frame Size | 180TC, 210C |
| Output Torque | 2782 lb-in |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Torque Out @ 1750 rpm | 2782 in lb |
| Bore Code | B9 |
| Media Mapping Output | G |
| Center Distance | 3.25 in |
| Motor Frame Size | B9180TC210C |
| Output Torque Rating Range [Min] | 2500 lb-in, 310 Nm |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Keyway Size | 1/4 x 1/8 |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Motor HP | 5 hp |
| Family Name | F |
| Lubrication | None |
| Output Bore Shaft Dia. | 1.375 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Standard | AGMA Service Class I |
| Motor Application | General Purpose |
| Max. Input HP @ 100 rpm | 0.48 hp |
| Base Mounting Attachment | No Base |
| Box Width | 7 9/16 in |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Series | 700 |
| Input HP @ RPM | 3.63 hp @ 1150 rpm, 5.8 hp @ 1750 rpm |
| Weight | 66.1 LB |
| EAN or UPC | 781711533451 |
