Find a Service Center
Boston Gear
F732-50E-B7-H
700 Series 50:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834496
- 1.50 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Rated Efficiency | 78% |
| Ratio | 50:1 |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Fan Cooled | No |
| Max. Input HP @ 100 rpm | 0.19 hp |
| Output Torque @ RPM | 2403 in lb @ 1750 rpm, 2450 in lb @ 1150 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Worm Position | Universal |
| Bolt Center | 7 1/2 in x 4 in |
| Motor Application | General Purpose |
| Box Length | 9 in |
| Output Shaft | Solid |
| Style | Right Angle |
| Material | Cast Iron, Standard Paint |
| Torque Out @ 1750 rpm | 2403 in lb |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Housing Material | Cast Iron |
| Input HP @ RPM | 1.21 hp @ 1150 rpm, 1.7 hp @ 1750 rpm |
| Lubrication | None |
| Standard | AGMA Service Class I |
| Use With | 732 |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Output Torque Rating Range [Min] | 2000 lb-in, 235 Nm |
| Output Bore Shaft Dia. | 1.375 in |
| Input Motor HP | 1.50 |
| Motor HP | 1.5 hp |
| Input Power Rating | 1.7 hp, 1.268 kW |
| Media Mapping Style | F |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Output Torque | 2403 lb-in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Frame | 140TC, 180C |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Output Speed | 35 rpm |
| Shaft Assembly Code | H |
| Input Configuration | C-Face Quilled |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Series | 700 |
| Box Height | 9 3/8 in |
| Bore Code | B7 |
| Media Mapping Output | H |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Keyway Size | 3/16 x 3/32 |
| Washdown Duty | No |
| Output Torque Rating Range [Max] | 2499 lb-in, 309 Nm |
| Box Width | 7 9/16 in |
| Output Configuration | Left & Right Output |
| Input (Shaft or Bore) Size | 7/8 in |
| Motor Frame Size | B7140TC180C |
| Torque Out @ 1150 rpm | 2450 in lb |
| Reduction Type | Single |
| Center Distance Code | 732 |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Base Mounting Attachment | No Base |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Center Distance | 3.25 in |
| Family Name | F |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Frame Size | 140TC, 180C |
| Weight | 66.1 LB |
| EAN or UPC | 781711520789 |
