Find a Service Center
Boston Gear
F738-60F-B7-H
700 Series 60:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101854495
- 2 Input Motor hp
- 700 Series
- 3.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Aluminum housings can be used for pressures up to 3,000 psi
- Steel housings must be used for operating pressures above 3,000 psi
| Output Torque @ RPM | 3277 in lb @ 1750 rpm, 3850 in lb @ 1150 rpm |
| Reduction Type | Single |
| Family Name | F |
| Style | Right Angle |
| Output Torque | 3277 lb-in |
| Torque Out @ 1150 rpm | 3850 in lb |
| Frame Size | 140TC, 180C |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Box Width | 8 3/8 in |
| Media Mapping Style | F |
| Rated Efficiency | 68% |
| Output Shaft | Solid |
| Installed Options | Fan |
| Output Configuration | Left & Right Output |
| Max. Input HP @ 100 rpm | 0.22 hp |
| HP @ RPM | 2 hp @ 1800 rpm |
| Output Torque Rating Range [Max] | 3499 lb-in, 399 Nm |
| Ratio | 60:1 |
| Max. Overhung Load @ 1750 rpm | 2000 lb/in |
| Worm Position | Universal |
| Base to Shaft Center Height w/Std. Base Kit | 7 1/2 in |
| Fan Cooled | Yes |
| Input (Shaft or Bore) Size | 7/8 in |
| Output Speed | 29.2 rpm |
| Motor Application | General Purpose |
| Keyway Size | 3/16 x 3/32 |
| Input Power Rating | 2.24 hp, 1.67 kW |
| Output Bore Shaft Dia. | 1.625 in |
| Max. Thrust Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Box Height | 10 7/16 in |
| Base to Centerline of Input Shaft | 7 5/8 in |
| Max. Overhung Load @ RPM | 2000 lb/in @ 1150 rpm, 2000 lb/in @ 1750 rpm |
| Frame | 140TC, 180C |
| Input Configuration | C-Face Quilled |
| Lubrication | None |
| Series | 700 |
| Center Distance | 3.75 in |
| Output Torque Rating Range [Min] | 2500 lb-in, 310 Nm |
| Bolt Centers w/ Std. Base Kit (in) | 10 3/8 x 7 |
| Center Distance Code | 738 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/Low Vert. Base Kit | 5 1/4 in |
| Motor Frame Size | B7140TC180C |
| Motor HP | 2 hp |
| Media Mapping Output | H |
| Input Motor HP | 2 |
| Output Shaft Projection | Solid Double Projecting Output |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 13.94 x 8.00 |
| Torque Out @ 1750 rpm | 3277 in lb |
| Max. Thrust Load @ 1150 rpm | 1300 lb/in |
| Washdown Duty | No |
| Housing Material | Cast Iron |
| Input HP @ RPM | 1.72 hp @ 1150 rpm, 2.24 hp @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Bolt Center | 8 1/2 in x 4 3/4 in |
| Output (Shaft or Bore) Size | 1 5/8 in |
| Standard | AGMA Service Class I |
| Box Length | 10 in |
| Base to Centerline of Output Shaft | 3 7/8 in |
| Bore Code | B7 |
| Material | Cast Iron, Standard Paint |
| Base to Shaft Center Height w/High Vert. Base Kit | 7 in |
| Shaft Assembly Code | H |
| Weight | 86.1 LB |
| EAN or UPC | 781711467718 |
