Find a Service Center
Boston Gear
FWA713-1200-B4-G
700 Series 1200:1 Ratio G Assembly Double Reduction Without Base Worm Gear Reducer
Item #101855852
- Double Reduction
- 1200:1 Ratio
- G Assembly
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Steel housings must be used for operating pressures above 210 bar (3,000 psi)
| Torque Out @ 1150 rpm | N/A |
| Worm Position | Universal¦Parallel |
| Base to Centerline of Input Shaft | 2 19/32 in |
| Ratio | 1200:1 |
| Torque Out @ 1750 rpm | 330 in lb |
| Media Mapping Output | G |
| Output Configuration | Left Output |
| Output Bore Shaft Dia. | 0.625 in |
| Base Mounting Attachment | No Base |
| Center Distance | 1.33 in |
| Bore Code | B4 |
| Box Width | 7 1/2 in |
| Output Torque | 330 lb-in |
| Output (Shaft or Bore) Size | 5/8 in |
| Output Shaft | Solid |
| Frame Size | 42CZ |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Family Name | FWA |
| Box Height | 4 21/32 in |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Housing Material | Cast Iron |
| Style | Parallel Shaft |
| Center Distance Code | 713 |
| Keyway Size | 1/8 x 1/16 |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Lubrication | None |
| HP @ RPM | 0.08333333 hp @ 1800 rpm |
| Media Mapping Style | FWA |
| Motor Application | General Purpose |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Shaft Assembly Code | G |
| Motor HP | 0.17 hp |
| Input Motor HP | 0.17 |
| Input (Shaft or Bore) Size | 1/2 in |
| Reduction Type | Double |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Input Configuration | C-Face Quilled |
| Output Shaft Projection | Solid Left Output |
| Bolt Center | 3 1/4" x 2" |
| Motor Frame Size | B442CZ |
| Frame | 42CZ |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Rated Efficiency | 12% |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Speed | 1.5 rpm |
| Box Length | 4 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Input Power Rating | 0.068 hp, 0.051 kW |
| Fan Cooled | No |
| Washdown Duty | No |
| Output RPM @ 1750 rpm Input | 1.46 rpm |
| Standard | AGMA Service Class I |
| Material | Cast Iron, Standard Paint |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Weight | 18.1 LB |
| EAN or UPC | 781711523247 |
