Find a Service Center
Boston Gear
HF7718-10-B5-H-P16
700 Series 10:1 Ratio Hollow Assembly Single Reduction Worm Gear Reducer Without Base
Item #101794155
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- High loads, high ambient or operating temperatures, and unusually contaminated atmospheres will require more frequent relubrication.
| Max. Input HP @ 100 rpm | 0.12 hp |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Input Motor HP | 1.50 |
| Family Name | HF |
| Media Mapping Style | HF |
| Keyway Size | 3/16 x 3/32 |
| Box Length | 5 1/2 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Output Speed | 175 rpm |
| Center Distance Code | 718 |
| Bore Code | B5 |
| Ratio | 10:1 |
| Base Mounting Attachment | No Base |
| Input HP @ RPM | 0.98 hp @ 1150 rpm, 1.61 hp @ 1750 rpm |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output Configuration | Hollow Output |
| Shaft Assembly Code | H |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Lubrication | None |
| Reduction Type | Single |
| Motor Frame Size | B556C |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Fan Cooled | No |
| Input Configuration | C-Face Quilled |
| Output Torque @ RPM | 480 in lb @ 1150 rpm, 536 in lb @ 1750 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Worm Position | Universal |
| Washdown Duty | No |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Style | Right Angle |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output Torque | 536 lb-in |
| Motor Application | General Purpose |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft Projection | Hollow Output |
| Media Mapping Hollow Bore | P16 |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Center Distance | 1.75 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Material | Cast Iron, Standard Paint |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Rated Efficiency | 92% |
| Frame | 56C |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Torque Out @ 1750 rpm | 536 in lb |
| Output Bore Shaft Dia. | 1 in |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Output (Shaft or Bore) Size | 1 in |
| Housing Material | Cast Iron |
| Motor HP | 1 hp |
| Frame Size | 56C |
| Box Width | 4 37/64 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Box Height | 5 3/4 in |
| Output Shaft | Hollow |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Torque Out @ 1150 rpm | 480 in lb |
| Use With | 718 |
| Series | 700 |
| Media Mapping Output | H |
| Weight | 20.1 LB |
| EAN or UPC | 781711630143 |
