Boston Gear

HF7718-30-B5-H-P16

700 Series 30:1 Ratio Hollow Assembly Single Reduction Worm Gear Reducer Without Base

Item #101842945

0.5 Input Motor hp
700 Series
1.75 in Center Distance
Single Reduction

Auto Replenish

each One-time purchase

Product Details

0.5 Input Motor hp
700 Series
1.75 in Center Distance
Single Reduction

description

Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.

features

Large oil reservoir provides efficient heat dissipation and lubrication for longer life
Housing is straddle milled top and bottom for precise alignment
Internal baffles ensure positive, leak-free venting
Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
High strength steel output shaft ensures capacity for high torque
Pipe plugs allow easy fill, level and drain in any mounting position
Super finished oil seal diameters on both input and output shafts extend seal life

caution

To clean polycarbonate bowls, use mild soap and water only
do not use cleansing agents such as acetone, benzene, carbon tetrachloride, gasoline, toluene, etc., which damage this plastic

Specifications

Family Name	HF
Reduction Type	Single
Worm Position	Universal
Media Mapping Hollow Bore	P16
Series	700
Output Torque	573 lb-in
Use With	718
Output Shaft Projection	Hollow Output
Input Configuration	C-Face Quilled
Bolt Center	4 3/16 in x 2 3/4 in
Max. Overhung Load @ RPM	500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm
Output Torque Rating Range [Min]	500 lb-in, 60 Nm
Thermal Input Horsepower @ 1750 RPM	N/A
Housing Material	Cast Iron
Box Width	4 37/64 in
Center Distance	1.75 in
Output Shaft	Hollow
Output RPM @ 1750 rpm Input	58.33 rpm
Output Configuration	Hollow Output
Box Height	5 3/4 in
Bolt Centers w/ Vertical "J" Base Kit (in)	7.63 x 2.50
Max. Overhung Load @ 1750 rpm	500 lb/in
Box Length	5 1/2 in
Output Torque Rating Range [Max]	749 lb-in, 84 Nm
Bore Code	B5
Motor HP	0.5 hp
Max. Input HP @ 100 rpm	0.057 hp
Torque Out @ 1750 rpm	573 in lb
Base to Centerline of Input Shaft	3 13/16 in
Rated Efficiency	82%
Torque Out @ 1150 rpm	530 in lb
Shaft Assembly Code	H
Bolt Centers w/ Std. Base Kit (in)	5 3/4 x 4 1/2
Max. Thrust Load @ 1150 rpm	500 lb/in
Keyway Size	3/16 x 3/32
Media Mapping Style	HF
Frame Size	56C
Base Mounting Attachment	No Base
Base to Centerline of Output Shaft	2 1/16 in
Frame	56C
Style	Right Angle
Input HP @ RPM	0.4 hp @ 1150 rpm, 0.65 hp @ 1750 rpm
Washdown Duty	No
Motor Application	General Purpose
Output Bore Shaft Dia.	1 in
Motor Frame Size	B556C
Input Power Rating	0.65 hp, 0.485 kW
Base to Shaft Center Height w/Low Vert. Base Kit	3 in
Max. Thrust Load @ RPM	500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm
Input Motor HP	0.50
Lubrication	None
Fan Cooled	No
Base to Shaft Center Height w/Vert. "J" Base Kit	3.5 in
Center Distance Code	718
Ratio	30:1
Output Torque @ RPM	530 in lb @ 1150 rpm, 573 in lb @ 1750 rpm
Base to Shaft Center Height w/Std. Base Kit	4.38 in
Bolt Center Length x Bolt Center Width	4 3/16 in x 2 3/4 in
Media Mapping Output	H
Standard	AGMA Service Class II
HP @ RPM	0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm
Output Speed	58.3 rpm
Output RPM @ Input RPM	58 rpm @ 1750 rpm
Input (Shaft or Bore) Size	5/8 in
Bolt Centers w/ Vertical Base Kits (in)	7.38 x 4.00
Material	Cast Iron, Standard Paint
Output (Shaft or Bore) Size	1 in
Base to Shaft Center Height w/High Vert. Base Kit	4.38 in
Weight	20.1 LB
EAN or UPC	781711630204