- Size 137
- 1:1 Ratio
- Vertical, Double, Clockwise/Counter Clockwise, Up & Down Output
- Horizontal Shaft Input, Facing You
description
- Designed for high efficiency, quiet operation and long service life.
features
- Gears are made of hardened alloy steel
- Shafts are heat-treated alloy steel mounted on heavy-duty, tapered roller bearings
- Housings are made of cast iron, precision-machined to ensure accurate, permanent alignment of the gears
- Shaft projections have quality oil seals
- Assembly can be mounted in any position with input shaft horizontal by relocating oil plugs in proper position
caution
- Polycarbonate bowls should not be exposed to chlorinated hydro-carbons, ketones, esters and certain alcohols
- Some chemicals can cause damage
- Cannot be used in air systems where compressors are lubricated with fire-resistant fluids, such as phosphate ester and di-ester types
- Polycarbonate bowls, being transparent and tough, are ideal for use with filters and lubricators. They are suitable for use in normal industrial environments, but should not be located in areas where they could be subjected to direct sunlight, an impact
| Output RPM @ 1750 rpm Input | 1750 rpm |
| Output Shaft Position | Up & Down |
| Output Relation to Base | Vertical |
| Shaft Arrangement | #19 |
| Input Configuration | Shaft Input |
| Assembly | N |
| Output (Shaft or Bore) Size | 3/4 in |
| Unit Size | 137 |
| Bolt Hole Pattern | 4.88 in x 4.88 in |
| Max. Overhung Load @ 1750 rpm | 317 lb/in |
| Torque Out @ 1750 rpm | 318 in lb |
| Washdown Duty | No |
| Box Length | 8.47 in |
| Bearing Type | Roller Bearing |
| Input (Shaft or Bore) Size | 3/4 in |
| Ratio | 1:1 |
| Output Configuration | Double |
| Box Height | 5.9 in |
| Box Width | 5.72 in |
| Torque Out @ 1150 rpm | 318 in lb |
| Gear Style | Spiral Bevel |
| Input Relation to Base | Horizontal |
| Relative Shaft Rotation | Up - Clockwise, Down - Counter Clockwise |
| Input Shaft Position | Facing You |
| Weight | 27.1 LB |
| EAN or UPC | 781711422304 |

