Find a Service Center
- 24 Diametral Pitch
- 20⁰ Pressure Angle
- 14 Teeths
- Molded Delrin Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| No. of Teeths | 14 |
| Torque at 1800 RPM | 4.9 lb/in |
| Pitch Dia. | 0.583 in |
| Pitch Diameter | 0.583 in |
| Set Screw | N/A |
| No. of Teeth | 14 |
| Face Width | 0.25 in |
| Set Screw Size | N/A |
| Keyway | w/o Keyway, w/o Setscrew |
| Bore Size | 0.1875 in |
| Hardened Teeth | Without Hardened Teeth |
| Outside Dia. | 0.67 in |
| Torque at 600 RPM | 6.2 lb/in |
| Pressure Angle | 20 degrees |
| Bore Dia. | 0.188 in |
| Hub Dia. | 0.44 in |
| Length Through Bore | 0.5625 in |
| Torque at 900 RPM | 5.8 lb/in |
| Outside Dia. [Min] | 0.67 in |
| Material | Molded Delrin |
| O.D. | 0.666 in |
| Torque at 1200 RPM | 5.4 lb/in |
| Origin | Reborable |
| Torque at 300 RPM | 6.7 lb/in |
| Bore Type | Minimum Plain Bore |
| Type | A |
| Diametral Pitch | 24 |
| Torque at 200 RPM | 6.8 lb/in |
| Weight | 0.011 LB |
| EAN or UPC | 781711540336 |
