Find a Service Center
- Molded Delrin Material
- 60 Teeth
- 24 Diametral Pitch
- 2.583 in Outside Diameter
- 20⁰ Pressure Angle
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Set Screw | N/A |
| Keyway | w/o Keyway, w/o Setscrew |
| Outside Dia. | 2.58 in |
| Face Width | 0.25 in |
| Bore Type | Minimum Plain Bore |
| Bore Dia. | 0.313 in |
| Origin | Reborable |
| Material | Molded Delrin |
| Set Screw Size | N/A |
| Length Through Bore | 0.5625 in |
| Type | B |
| No. of Teeth | 60 |
| Style | Hub |
| Torque at 600 RPM | 28 lb/in |
| Diametral Pitch | 24 |
| Torque at 1800 RPM | 15.6 lb/in |
| Pressure Angle | 20 degrees |
| Bore Size | 0.3125 in |
| Torque at 1200 RPM | 20 lb/in |
| Torque at 300 RPM | 35 lb/in |
| Pitch Dia. | 2.5 in |
| Hub Dia. | 0.67 in |
| No. of Teeths | 60 |
| Pitch Diameter | 2.5 in |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 900 RPM | 23.3 lb/in |
| Torque at 200 RPM | 38 lb/in |
| O.D. | 2.583 in |
| Outside Dia. [Min] | 2.58 in |
| Weight | 0.031 LB |
| EAN or UPC | 781711540633 |
