Find a Service Center
- 32 Diametral Pitch
- 20⁰ Pressure Angle
- 16 Teeths
- Molded Delrin Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Pitch Dia. | 0.5 in |
| Keyway | w/o Keyway, w/o Setscrew |
| O.D. | 0.562 in |
| Bore Dia. | 0.156 in |
| No. of Teeths | 16 |
| Material | Molded Delrin |
| Bore Type | Minimum Plain Bore |
| Hub Dia. | 0.34 in |
| Torque at 200 RPM | 3.6 lb/in |
| Face Width | 0.188 in |
| Length Through Bore | 0.498 in |
| Torque at 900 RPM | 3.1 lb/in |
| Outside Dia. | 0.5625 in |
| Type | A |
| Diametral Pitch | 32 |
| Torque at 600 RPM | 3.3 lb/in |
| Torque at 1800 RPM | 2.7 lb/in |
| Torque at 1200 RPM | 2.9 lb/in |
| Set Screw Size | N/A |
| No. of Teeth | 16 |
| Pressure Angle | 20 degrees |
| Origin | Reborable |
| Outside Dia. [Min] | 0.5625 in |
| Pitch Diameter | 0.5 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Size | 0.15625 in |
| Torque at 300 RPM | 3.5 lb/in |
| Set Screw | N/A |
| Weight | 0.021 LB |
| EAN or UPC | 781711539859 |
