Find a Service Center
- Molded Delrin Material
- 14 Teeth
- 24 Diametral Pitch
- 0.666 in Outside Diameter
- 20⁰ Pressure Angle
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Bore Type | Minimum Plain Bore |
| Outside Dia. [Min] | 0.67 in |
| Material | Molded Delrin |
| Torque at 300 RPM | 6.1 lb/in |
| Pressure Angle | 20 degrees |
| Torque at 200 RPM | 6.8 lb/in |
| Torque at 1200 RPM | 5.4 lb/in |
| Diametral Pitch | 24 |
| Bore Size | 0.1875 in |
| Length Through Bore | 0.5625 in |
| Pitch Diameter | 0.583 in |
| Set Screw Size | N/A |
| Set Screw | N/A |
| Pitch Dia. | 0.583 in |
| Keyway | w/o Keyway, w/o Setscrew |
| Face Width | 0.25 in |
| Torque at 1800 RPM | 4.9 lb/in |
| No. of Teeth | 14 |
| Hub Dia. | 0.44 in |
| Torque at 900 RPM | 5.8 lb/in |
| Type | A |
| Hardened Teeth | Without Hardened Teeth |
| Bore Dia. | 0.188 in |
| Origin | Reborable |
| Torque at 600 RPM | 6.2 lb/in |
| O.D. | 0.666 in |
| No. of Teeths | 14 |
| Outside Dia. | 0.67 in |
| Weight | 0.011 LB |
| EAN or UPC | 781711540657 |
