Find a Service Center
- Molded Delrin Material
- 30 Teeth
- 24 Diametral Pitch
- 1.333 in Outside Diameter
- 20⁰ Pressure Angle
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Bore Size | 0.250 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Type | Minimum Plain Bore |
| Style | Hub |
| Diametral Pitch | 24 |
| O.D. | 1.333 in |
| Bore Dia. | 0.25 in |
| Torque at 300 RPM | 17.7 lb/in |
| Pressure Angle | 20 degrees |
| Material | Molded Delrin |
| Keyway | w/o Keyway, w/o Setscrew |
| Torque at 200 RPM | 18.6 lb/in |
| Pitch Dia. | 1.25 in |
| No. of Teeth | 30 |
| Set Screw | N/A |
| Pitch Diameter | 1.25 in |
| Torque at 1800 RPM | 10.4 lb/in |
| Torque at 600 RPM | 15.5 lb/in |
| Face Width | 0.25 in |
| Torque at 900 RPM | 13.8 lb/in |
| Hub Dia. | 0.63 in |
| Torque at 1200 RPM | 12.4 lb/in |
| No. of Teeths | 30 |
| Type | B |
| Outside Dia. | 1.33 in |
| Set Screw Size | N/A |
| Origin | Reborable |
| Length Through Bore | 0.5625 in |
| Outside Dia. [Min] | 1.33 in |
| Weight | 0.031 LB |
| EAN or UPC | 781711540800 |
