Find a Service Center
- Molded Delrin Material
- 54 Teeth
- 48 Diametral Pitch
- 1.167 in Outside Diameter
- 20⁰ Pressure Angle
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Hub Dia. | 0.61 in |
| No. of Teeth | 54 |
| Bore Dia. | 0.25 in |
| Material | Molded Delrin |
| Outside Dia. [Min] | 1.17 in |
| Type | B |
| Style | Hub |
| Pitch Dia. | 1.125 in |
| Set Screw | N/A |
| Diametral Pitch | 48 |
| Torque at 300 RPM | N/A |
| Keyway | w/o Keyway, w/o Setscrew |
| Pressure Angle | 20 degrees |
| Bore Size | 0.250 in |
| Bore Type | Minimum Plain Bore |
| Torque at 1200 RPM | N/A |
| Torque at 1800 RPM | N/A |
| Outside Dia. | 1.17 in |
| Length Through Bore | 0.375 in |
| Torque at 200 RPM | N/A |
| No. of Teeths | 54 |
| Set Screw Size | N/A |
| O.D. | 1.167 in |
| Hardened Teeth | Without Hardened Teeth |
| Origin | Reborable |
| Torque at 600 RPM | N/A |
| Face Width | 0.125 in |
| Pitch Diameter | 1.125 in |
| Torque at 900 RPM | N/A |
| Weight | 0.021 LB |
| EAN or UPC | 781711539705 |
