Skip to content Skip to navigation menu
TIGEAR-2 Right Angle Worm Gear Reducer

13Q40L56

TIGEAR-2 Right Angle Worm Gear Reducer
Item #101916280
  • 1.33 in Center Distance
  • 56C Frame Size
  • Cast Iron Housing Material
  • Left Output
TIGEAR-2 Right Angle Worm Gear Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1.33 in Center Distance
  • 56C Frame Size
  • Cast Iron Housing Material
  • Left Output

features

  • Totally enclosed, ventless sealing system
  • Factory filled synthetic lubricant
  • HNBR seal material provides better wear and temperature range
  • Increased gear precision and accuracy
  • Seal journals held to exacting tolerances
  • Higher torque capacity
  • Greater efficiency
  • Cooler operating temperatures
  • Left, right or hollow output shafts

compliances

  • 0

options

  • Base kits
  • Tie rods
  • Output brackets
Suitable For Washdown No
Bolt Pattern 3.25 x 2
Horsepower Output 0.22 hp
Lubrication PAG, Standard Temperature
Ratio 40:1
Box Width 4.1 in
Output RPM @ Input RPM 44 rpm @ 1750 rpm
Component Type Gearbox
Output Shaft Left (Solid A)
Frame Size 56C
Mounting Bolt Pattern Length 3.25 in
Seal Type Single-Lip Contact
Nominal Ratio 40
Output Configuration Left Output
Shaft Length Output 1.9 in
Bolt Centers w/ Vertical "J" Base Kit (in) 6.88 x 2
Center Distance 1.33 in
Output RPM @ 1750 rpm Input 43.75 rpm
Overhung Load 650 lbf
Horsepower Input 0.32 hp
Output Shaft Diameter 0.625 in
HP @ RPM 0.25 hp @ 1800 rpm
Input Configuration C-Face Quilled
Output Style Left
Frame 56C
Housing Material Cast Iron
Input Style Quill
Output (Shaft or Bore) Size 5/8 in
Torque Out @ 1750 rpm 319 in lb
Motor Application General Purpose
Box Length 4.24 in
Bolt Centers w/ Std. Base Kit (in) 4.375 x 3.31
Motor Compatibility NEMA Motor
Input (Shaft or Bore) Size 5/8 in
Thermal Horsepower Rating 0.7 hp
Base to Output Center Height 1.71 in
Output Torque @ RPM 319 in lb @ 1750 rpm
Box Height 4.88 in
Input HP @ RPM 0.32 hp @ 1750 rpm
Center to End of Shaft 4 in
Paint Type Standard
Mounting Bolt Pattern Width 2 in
Rated Torque Output 319 lbf
Weight 36.0 LB
EAN or UPC 782475741007
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison