Skip to content Skip to navigation menu
TIGEAR-2 Right Angle Worm Gear Reducer

15Q07R56

TIGEAR-2 Right Angle Worm Gear Reducer
Item #100949355
  • 1.5 in Center Distance
  • 56C Frame Size
  • Cast Iron Housing Material
  • Right Output
TIGEAR-2 Right Angle Worm Gear Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1.5 in Center Distance
  • 56C Frame Size
  • Cast Iron Housing Material
  • Right Output

features

  • Totally enclosed, ventless sealing system
  • Factory filled synthetic lubricant
  • HNBR seal material provides better wear and temperature range
  • Increased gear precision and accuracy
  • Seal journals held to exacting tolerances
  • Higher torque capacity
  • Greater efficiency
  • Cooler operating temperatures
  • Left, right or hollow output shafts

compliances

  • 0

options

  • Base kits
  • Tie rods
  • Output brackets
Input Configuration C-Face Quilled
Output Configuration Right Output
Output Style Right
Shaft Length Output 2.23 in
Frame 56C
Seal Type Single-Lip Contact
Lubrication PAG, Standard Temperature
Center Distance 1.5 in
Housing Material Cast Iron
Motor Application General Purpose
Torque Out @ 1750 rpm 337 in lb
Overhung Load 710 lbf
Horsepower Input 1.4 hp
Rated Torque Output 337 lbf
Bolt Centers w/ Vertical "J" Base Kit (in) 7.98 x 2.50
HP @ RPM 1 hp @ 1800 rpm
Suitable For Washdown No
Paint Type Standard
Output Shaft Right (Solid B)
Input (Shaft or Bore) Size 5/8 in
Bolt Centers w/ Std. Base Kit (in) 5.25 x 4.31
Input Style Quill
Thermal Horsepower Rating 2.55 hp
Horsepower Output 1.26 hp
Output Shaft Diameter 0.75 in
Nominal Ratio 7
Box Height 5.48 in
Component Type Gearbox
Bolt Pattern 3.50 x 2.25
Base to Output Center Height 1.87 in
Input HP @ RPM 1.4 hp @ 1750 rpm
Box Length 5 in
Output RPM @ Input RPM 233 rpm @ 1750 rpm
Output (Shaft or Bore) Size 3/4 in
Output RPM @ 1750 rpm Input 233.33 rpm
Mounting Bolt Pattern Width 2.25 in
Output Torque @ RPM 337 in lb @ 1750 rpm
Box Width 4 in
Mounting Bolt Pattern Length 3.5 in
Motor Compatibility NEMA Motor
Frame Size 56C
Ratio 7.5:1
Center to End of Shaft 4.31 in
Weight 22.0 LB
EAN or UPC 782475745111
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison