Skip to content Skip to navigation menu
TIGEAR-2 Right Angle Worm Gear Reducer

35Q60R56

TIGEAR-2 Right Angle Worm Gear Reducer
Item #101915780
  • 3.5 in Center Distance
  • 56C Frame Size
  • Cast Iron Housing Material
  • Right Output
TIGEAR-2 Right Angle Worm Gear Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 3.5 in Center Distance
  • 56C Frame Size
  • Cast Iron Housing Material
  • Right Output

features

  • Totally enclosed, ventless sealing system
  • Factory filled synthetic lubricant
  • HNBR seal material provides better wear and temperature range
  • Increased gear precision and accuracy
  • Seal journals held to exacting tolerances
  • Higher torque capacity
  • Greater efficiency
  • Cooler operating temperatures
  • Left, right or hollow output shafts

compliances

  • 0

options

  • Base kits
  • Tie rods
  • Output brackets
Base to Centerline of Output Shaft 3.99 in
Seal Type Single-Lip Contact
Nominal Ratio 60
Base to Centerline of Input Shaft 7.49 in
Paint Type Standard
Base to Output Center Height 3.99 in
Overhung Load 2760 lbf
Center Distance 3.5 in
Box Length 8 7/8 in
Motor Application General Purpose
Input Style Quill
Thermal Input Horsepower @ 1750 RPM 2.43 hp
Shaft Length Output 3.51 in
Output (Shaft or Bore) Size 1 1/2 in
Ratio 60:1
Output Style Right
Suitable For Washdown No
Mounting Bolt Pattern Length 7.5 in
Output RPM @ 1750 rpm Input 29 rpm
Washdown Duty No
Max. Overhung Load @ RPM 2760 lb/in @ 1750 rpm
Thermal Input Horsepower @ RPM 2.43 hp @ 1750 rpm
Max. Overhung Load @ 1750 rpm 2760 lb/in
Horsepower Output 1.48 hp
Input (Shaft or Bore) Size 5/8 in
Rated Torque Output 3194 lbf
Lubrication PAG, Standard Temperature
Frame 56C, 48Y
Output Configuration Right Output
Box Width 7.05 in
Output Shaft Right (Solid B)
HP @ RPM 1 hp @ 1800 rpm
Component Type Gearbox
Reduction Type Single Reduction
Input HP @ RPM 2.19 hp @ 1750 rpm
Input Configuration C-Face Quilled
Housing Material Cast Iron
Bearing Type Tapered Roller on O/P
Torque Out @ 1750 rpm 3194 in lb
Output RPM @ Input RPM 29 rpm @ 1750 rpm
Motor Compatibility NEMA Motor
Center to End of Shaft 7.06 in
Output Shaft Diameter 1.5 in
Horsepower Input 2.19 hp
Thermal Horsepower Rating 2.43 hp
Bolt Centers w/ Vertical "J" Base Kit (in) 5 1/2 x 5.45
Box Height 10.57 in
Output Torque @ RPM 3194 in lb @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in) 9 1/2 x 6 1/8
Frame Size 56C
Mounting Bolt Pattern Width 4 in
Bolt Pattern 7.5 x 4
Weight 109.0 LB
EAN or UPC 782475751778
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison