Skip to content Skip to navigation menu
S-2000 Series Cast Iron Pillow Block


S-2000 Series Cast Iron Pillow Block
Item #100940961
  • 2 Bolts
  • Cast Iron Housing Material
  • Solid Housing Construction
  • Steel Insert Material
S-2000 Series Cast Iron Pillow Block
    Shipment Options
  • 2 Bolts
  • Cast Iron Housing Material
  • Solid Housing Construction
  • Steel Insert Material


  • High capacity double row spherical bearing in a compact, one-piece housing.


  • 65° set screw collar
  • TRIDENT™, nitrile rubber contact seal for protection against contaminants
  • Seal land allows for +/- one degree of misalignment
  • Field-convertible between expansion and non-expansion by using snap ring pliers
  • Case-carburized inner rings resist cracking
  • Machined to accept Dodge OPTIFY™ sensors for bluetooth-enabled condition monitoring
Speed [Max] 1280 rpm
Inch/Metric Inch
Bolt Hole Spacing 10 in
Bolt Size 7/8 in
Bearing Type Spherical Roller
Bolt Diameter 0.875 in
Static Load Rating [Max] 81,500.00 lbf
Bolt Holes 2
Dynamic Load Capacity 65500 lbf
Series S-2000
Center of Bearing to Front of Inner Ring 2 37/64 in
Seal Type TRIDENTâ„¢ Triple Lip Rubbing Seals
Grease Name MobilGrease XHP222
Greasable Yes
Bearing Insert 22218
Expansion Capability Fixed
Mounted Unit Duty Heavy-Duty
Pillow Block Type Thru-Bolt
End Type Open End
Housing Height 7 1/2 in
Total Float 1/4 in
Length Through Bore 4 1/64 in
Bolt Hole Spacing Range [Min] 9 3/8 in
Housing Material Cast Iron
Housing Construction Solid
Take-Up Frame Size HD-250, TS-400
Bore Length 4.02 in
Lubrication Grease
Base Width 3 27/64 in
Bearing Design Non-Expansion
Static Load Capacity 81500 lbf
Misalignment Range ±1°
No. of Bolts 2
Base Height 2 1/4 in
Bolt to Bolt [Max] 10.63 in
Shaft Dia. 3.438 in
Sensor Ready Yes
Center of Bearing to Back of Inner Ring 1 7/16 in
Locking Device Springlokâ„¢ Collar
Insert Material Steel
Bolt Hole Length 1 5/8 in
Bearing Component Mounted Bearing
Collar O.D. 5 1/2 in
RPM [Max] 1,280 rpm
Housing Dimensional Standard S-2000
Bolt Hole Spacing Range [Max] 10 5/8 in
Insert Type Steel Insert
Bolt to Bolt [Min] 9.38 in
Shaft Attachment Setscrew
Dynamic Load Rating 65,500.00 lbf
Base Length 13 in
Base to Center Height 3.75 in
Weight 32.36 LB
EAN or UPC 782475305933
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison