Find a Service Center
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 18 Tooth
- 1 in Belt Width
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Finished Bore | N/A |
| Belt Size | L |
| Pitch Diameter | 2.149 in |
| Bore Range [Min] | 0.5 in |
| Bushing Type | Taper-Lock |
| Belt Width | 1 in |
| Outside Dia. | 2.119 in |
| Hub Dia. | N/A |
| Type | KF-1 |
| Length Through Bore | 0.87 in |
| Belt Pitch | 3/8 in |
| Hub Projection | 0.06 in |
| Bore Range [Max] | 1.125 in |
| Bushing Series | 1108 |
| Bore Type | Bushed Bore |
| No. of Teeth | 18 |
| Weight | 0.54 LB |
| EAN or UPC | 782475576005 |
