Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 22 Tooth
- 1 in Belt Width
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Finished Bore | N/A |
| Belt Pitch | 1/2 in |
| Bushing Type | Taper-Lock |
| No. of Teeth | 22 |
| Bushing Series | 1610 |
| Bore Type | Bushed Bore |
| Length Through Bore | 1 in |
| Belt Size | H |
| Outside Dia. | 3.45 in |
| Hub Projection | 0.11 in |
| Bore Range [Min] | 0.5 in |
| Pitch Diameter | 3.501 in |
| Belt Width | 1 in |
| Bore Range [Max] | 1.625 in |
| Hub Dia. | N/A |
| Type | KF-1 |
| Weight | 1.81 LB |
| EAN or UPC | 782475088379 |
