Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 22 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Material | Steel |
| Hub Type | A |
| Pitch Diameter | 3.501 in |
| No. of Teeth | 22 |
| Bore Range [Max] | 1.625 in |
| Width Across Teeth | 1.063 in |
| Pitch Dia. | 3.501 in |
| Teeth Face Width | 1.313 in |
| Bushing Type | Taper-Lock |
| Bushing Bore Size [Min] | 0.5 in |
| Bore Range [Min] | 0.5 in |
| Flange O.D. | 3.733 in |
| Belt Size | H |
| Finished Bore | N/A |
| Material Internal Use | Atomized Metals |
| Length Through Bore | 1 in |
| Bushing Series | 1610 |
| Belt Pitch | 1/2 in |
| Belt Width | 1 in |
| Material External Use | Steel |
| Type | KF-1 |
| Bore Size [Max] | 1.625 in |
| Bore Size [Min] | 0.5 in |
| Bore Type | Bushed |
| Bushing Bore Size [Max] | 1.625 in |
| Construction Internal | Solid |
| Hub Projection | 0.312 in |
| Outside Dia. | 3.447 in |
| Weight | 1.8 LB |
| EAN or UPC | 697950083308 |
