Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Motor Element | Gerotor |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 963 rpm |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Code | A |
| Port Size | 7/8-14 |
| Maximum Speed @ Continuous Flow | 963 rpm @ 15 gal/min |
| Displacement | 58 cm3/Rev |
| Duty | Standard-Duty |
| Series | S Series |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Motor Type | Spool Valve |
| Seal Material | Buna-N |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Paint Code | A |
| Splines | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1021 in lb |
| Flange Orientation | Standard |
| Mounting Hole Size | 0.54 in |
| Paint | Primer Low Gloss Black |
| Output Shaft Code | 01 |
| Displacement (in³/rev) | 3.5 |
| Special Features | None |
| Shaft Type | Straight w/ Woodruff Key |
| Mount Type | 2 Bolt |
| Material | Cast Iron |
| Bolt Circle Dia. | 4.19 in |
| Port Size & Location | SAE-10 Side |
| Torque | 85.1 Nm |
| Mounting Type Code | REF! |
| Port Type | SAE O-Ring |
| Pressure [Max] | 2000 psi |
| Port Location | Side Port |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Flow Rate | 57.97 lpm |
| RPM [Min] | 963 rpm |
| Rotation | Standard Rotation |
| Case Drain Code | 1 |
| Weight | 29.0 LB |
