Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 2 Bolt Mount
- Straight Output Shaft
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Corrosion Resistant | No |
| Special Features | None |
| Pressure [Max] | 1700 psi |
| Motor Element | Geroler |
| Paint/Packaging | Low Gloss Black |
| Output Torque at Rated PSI (inch/pounds) | 3290 in lb |
| Output Shaft Code | 01 |
| Paint | Primer Low Gloss Black |
| Intermittent Pressure [Max] | 374 bar |
| Special Features Hardware Code | 00 |
| Port Code | C |
| Series | S Series |
| Flow Rate | 57 lpm |
| Torque | 372 Nm |
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain Code | 1 |
| Material | Cast Iron |
| Port Location | Side Port |
| RPM [Max] | 253 rpm |
| Mount Type | 2 Bolt |
| Splines | 0 |
| Paint Code | A |
| Port Type | Manifold, O-Ring |
| Displacement (in³/rev) | 13.67 |
| Maximum Speed @ Continuous Flow | 253 rpm @ 15 gal/min |
| Bolt Circle Dia. | 4.187 in |
| Seal Material | Buna-N |
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Mounting Hole Size | 0.54 in |
| Flow [Max] | 15 gal/min |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Rotation | Standard Rotation |
| Mounting Type Code | REF! |
| Flange Orientation | Standard |
| Displacement | 224 cm3/Rev |
| RPM [Min] | 224 rpm |
| Case Drain | SAE-4 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Weight | 29.0 LB |
