Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.
features
Durable Pump TechnologyHandles slurries and abrasives all without damage to the pump
Gentle on shear sensitive material
Diaphragm PumpRuns dry
No rotating or moving fluid seals
Self-priming
Electric DriveReduce energy consumption and operating costs
Increase pump control
Accurately meter fluid
Fluid SectionCreate the pump you need with multiple material offerings for manifolds, seats, balls, and diaphragms
Patent Pending Air Charged DriveIncrease diaphragm life without compromising your fluid
Ability to reduce pulsation on fluid outlet
Stalls under pressure without additional switches and controls
Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumpsSeal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions
Power Source
Electric
Air Inlet
3/8 in
Connection Type
End Flange ANSI/DIN
Operating Temperature [Min]
32 °F
Operating Temperature [Max]
104 °F
Fluid Outlet Size
1 in, 25.4 mm
Fluid Section Material
Polypropylene
Cycle Rate [Max]
280 CPM
Fluid Pressure [Max]
4.8 bar, 70 psi
Motor Speed [Max]
1800 rpm
Ball Material
PTFE
Voltage
230 VAC
Center Section Material
Stainless Steel
Compatible Material
Antifreeze, Detergent, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solventborne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink
Storage Temperature [Max]
104 ⁰F
Flow [Max]
42 gal/min
Seat Material
Polypropylene
Diaphragm Material
PTFE/Santoprene 2-Piece
Fluid Inlet Size
1 in, 25.4 mm
Amps [Max]
5.7
Series
1050e
Motor Type
AC
Current [Max]
5.7 A
Fluid Outlet
1 in
Fluid Inlet
1 in
Air Inlet Thread Gender
Female
Maximum Pumpable Solids Size
1/8 in
Power Rating
2 hp
Storage Temperature [Min]
32 °F
Type
Electric Diaphragm Pump
Manifold Configuration
End Port
Ball/Check Material
PTFE
Solid Size [Max]
0.125 in, 3.175 mm
Material
Polypropylene
Manifold O-Ring Material
PTFE
Air Inlet Type
NPT
Flow Rate [Max]
42 gpm, 159 lpm
Weight
0.0 LB
EAN or UPC
755652312062
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
